TRM0 pages
"TRm" Heating mixer
"TRM" heating mixers have
shown themselves to be very
effective in the thermoplastic
transformation industry.
When a high quality of
material and a high hourly
production rate are required,
"TRM" heating mixers are the
ideal solution. These
machines are mainly used to
produce PVC DRY-BLEND,
either rigid or plasticized,
from polymers in suspension,
emulsion or mass. These
machines are also used for
densification or heat
agglomeration of other
thermoplastic resins such as
ABS, PE and PP and for
drying, hot nr cnld
distribution of pigments and
moistening.
TYPE
TRM 200
TRM 300
TRM 400
TRM 500
TRM 600
TRM 700
TRM 800
TRM 1000
TRM 1200
TRM 1500
TRM 2000
TRM 2500
total
capacity
to
200
300
400
500
600
700
800
1000
1200
1500
2000
2500
capacity
utilisable
(I)
170
250
340
420
510
600
680
850
1000
1280
1700
2150
mix1"
weight
(kg)
85
125
170
210
255
300
340
425
500
640
850
1050
motor power KWB1
standard
18/36
34/60
57/79
64/98
75/113
75/128
90/150
200 D.C.
250 D.C.
330 D.C.
370 D.C.
boost
35/45
57/69
64/98
75/113
75/128
90/150
113/165
250 D.C.
280 D.C.
370 D.C.
400 D.C.
450 D.C. 500 D.C.
"TRM" heating mixer
N.B. The data shown
in the table are purely
indicative and must
be confirmed by
PLAS MEC.
1) The mix weights
are valid for
PVC-suspension
formulae with an
apparent density of
0,5 kg/I inclusive of
additives and for
plasticized
PVC-suspensbn with
a percentage of
plasticizers not
greater than 40 p.h.r.
2) Direct current
motors, frequency
variators, or soft-start
can be fitted to all
models on request.
Optional: combined
horizontal/vertical lid opening.
UESSEL LID
Can be supplied in different
configurations: opens
vertically with appropriate
lifting system, opens
horizontally with lifting
system operated by
pneumatic cylinder. Safety
limit-switch with motor
cut-off on opening. Equipped
with attachments for product
feed in liquid or powder form.
Optional: hinged outlet to facili-
tate cleaning.
IfliKinG UESSEL
Internal surfaces in contact
with the material are made of
stainless steel: the vessel has
a double steel jacket. The
internal space is designed for
circulation of heating or
cooling fluid as necessary.
TEmPERHTURE COIITROI
By laterally-positioned
thermocouple on the side of
the mixing vessel to control
operating and safety
temperatures.
DISCHARGE
Stainless steel closure plug
designed to fit the internal
form of the vessel. Operated
by pneumatic cylinder
niixinc TOOL
Stainless steel construction
with wear- resistant coating
on parts affected by greatest
friction. Numerous
configurations and profiles
available for different mixing
requirements.
OPTion
Vertically positioned lid to
facilitate cleaning.
"