FCT Trunnion Mounted Split Body Ball Valves, Models HPA, HRA, DB0 pages

VALVES & CONTROLS

FCT TRUNNION MOUNTED SPLIT BODY BALL VALVES
MODElS HPA, HRA, DB
Higher Maximum Set Pressure, Lower Height Profile and Weight Savings

Technical data
Models:

Sizes:

HPA (pin trunnion)
HRA (plate trunnion)
DB (pin trunnion)
2" to 60", FB and RB

Pressure rating: ANSI Class 150 to 2500,
API 6A up to 10000 psi
Body materials:

Carbon steel, stainless
steel, duplex and super
duplex, special alloys
Carbon steel with
stainless steel or
Inconel® overlay

Temp. range:

Pentair's FCT brand is a world leader in the
design and manufacture of trunnion
mounted ball valves for the oil and gas
industry. For more than 50 years the FCT
brand has been delivering high quality,
innovative and competitive valve systems
to the industry. FCT has continuously
invested in new products and technology
development and has actively worked with
end-users to develop custom valves
designed in accordance to customer
specific requirements. Working with some
of the largest energy companies, FCT has
earned an excellent reputation as an
international supplier of highly engineered
trunnion mounted ball valves.

General application
The FCT split body trunnion mounted
ball valves are widely used for upstream
HIPPS, subsea, high pressure, high
temperature, and cryogenic applications.

-321°F to +752°F
[-196°C to +400°C]

Connections:

End to end dimensions
per API 6D, ASME B16.10,
API 6A
Flanged RF and RTJ to
ASME B16.5 (2” to 24”,
except 22”), MSS SP44
on 22" and ASME B16.47
(26” and above)
Butt weld ends per ASME
B16.25
Mechanical joint, hub
on request

Features and benefits
• Guided stem design minimizes operating
torques which may result in lower
actuation costs and longer service life
benefits.

Soft seat material options (PFA,
PEEK, PCTFE and Devlon®)
Metal seats (TCC)
• Seat designs:
Single piston effect (standard)
provides self-relieving feature of
body cavity over pressurization
Double piston effect provides an
additional level of sealing capability
and reliability
• Design, manufacturing and materials
comply with the Essential Safety
Requirements of the 97/23/EC
Directive (PED).
• All valves designed to API 6D (ISO 14313)
or API 6A (ISO 10423).
• Body wall thickness complies with
ASME B16.34 (forged and/or cast).
• Full and reduced bore valves available.
• Antistatic device to BS 5351 (10 Ω under
12 Volt).
• Emergency sealant injection provision
(seats and stem).
• Fire-tested to API 6FA and BS 6755 Part II.
• Testing to API 6D, API 6A, API 598, ISO
5208, BS 6755 Pt.1, API 17D.
• Marking to API 6D, API 6A, MSS-SP-25,
PED.
• Available with manual operation, electric,
pneumatic or hydraulic actuation.

• Additional level of safety and reliability is
provided by the double piston effect. In
the event a seat is damaged, sealing is
assured irrespective of the flow through
the valve.
• Further safety assurance is delivered by a
blow-out proof stem design which is
shouldered and retained within the valve
body.
• Operational benefits of checking seat
integrity without disturbing the status of
the pipeline are possible due to the double
block and bleed feature, which allows
venting and draining of the body cavity in
both open and closed positions.
• Seat materials:

FCTMC-0220-US-1305

Copyright © 2013 Pentair

WWW.PENTAIR.COM/VALVES