The Pellbow®0 pages

Bulkmatology ٙ Solutions >

wear resistant eliminates streamers reduces fines

impact zone The Pellbow Resists Wear ٖ Naturally By design, material flowing through the Pellbow accumulates in the pocket or ٓimpact-zone and moves slowly upward and out. Incoming material is deflected at 90 degrees, with minimum resistance and no impact damage. The Pellbowԙ Family Sizes 2 to 10Ԕ ( 50mm 250mm) available >

The Challenge

In traditional long radius elbow installations, the pellets slide along the elbow wall at a high velocity. The strong centrifugal forces press the pellets against the outer metal surface. This causes friction which creates heat that melts the outer layer of the pellets, resulting in a thin film build-up along the surface of the wall. This build-up eventually breaks loose, forming unwanted streamers and fluff that lead to product contamination. Abrasive materials wear out the elbow walls quickly due to these high frictional forces.

The Solution Pellbow֙ Applications Pellbow Features Pellbowٙ Installation Using a Pellbow avoids ٕ For all high and low density Compact and easy to install on a Silo all the frictional problems dilute phase systems Օ 100% self cleaning Note how the orientation of caused in traditional elbows. For plastic pellets, other gra- Օ Fits all flange and pipe the Pellbows can vary and nules and abrasive products connections also, the space required is far For retrofitting existing Օ Available in cast iron, stain - less than what is required systems less and aluminum for a standard long radius For replacement of long and Օ Reduces noise level elbow. short radius elbows and ֕ Minimized pressure drop other pipe bends. >
Pelletron Corporation Lancaster, PA 17601-2208 info@pelletroncorp.com 499 Running Pump Rd USAT +1.717.293.4008F +1.717.293.4011 www.pelletroncorp.com size="-1">