عضویت 
ورود اعضا
راهنمای خرید
LOADING
High accuracy scanner SHP 1010 pages
نسخه متنی
"
"
| high accuracy scanner SHP 101 | ||||||||
| Metrology scanner Thermocouples and RTDs RS 232 Outstanding measurement homogeneity Fully compatible with the PHP 601 | ||||||||
| The SHP 101 bench top instrument is capable of scanning up to 12 temperature sensors. When used with the Precision Thermometer P-P 601, thermocouples and RIDs can be measured without loss of signal integity or performance. Each bock may be configured either as two measurement channels (thermocouple or voltage measurements) or as a 4 wire measurement (RIDs). | ||||||||
| Description.......................................... - Programming and processing by using the 12-key keypad, RS 232 link or optionͭal IEEE 488 link. - Connection of the sensors by means of screw terminals accepting 4-nm plugs (tellurium copper terminals with extremely | Applications..................................... - Scanning of thermocouples, RTDs and low level electrical signals. -Calibration of temperature sensors. - Mapping. - Use as voltmeter or ohmmeter input extension. | |||||||
| low thermocouple effect). - Switching of resistance in 3 or 4 wire configuration. - Switching of thermocouples with or withͭout reference junction compensation. - Outputs available for direct link to the high accuracy thermometer PHP 601. | ||||||||
| functions - The SHP 101 operates as follows: -Manually by using the front keypad. -Remote controlled either by a PHP601 (direct RS 232 command) or a controller (RS 232 or IEEE interfaces). Commands........................................... Channel and 2 or 4 wire configuration can be selected. Configuration....................................... -6 RTD measurement channels, 4 wire configuration or - 12 voltage (thermocouples) measurement | ||||||||
| channels, 2 wire configuration or - N 4 wire channels (0 < N < 6) and 2 x (6 - N) 2 wire channel Connection.......................................... Inputs: 4-mm tellurium copper terminals. Voltage and reference outputs: 4-mm copխper terminals. RTD and reference junction outputs: 5-pin connectors. Switching............................................ Relays with very low emf and contact resistance. | Stray emf: 0,2 uV max. Contact resistance: 300 mQ max. Max. contact resistance difference between two wires of a channel: 40 mil Deviation between input blocks: ± 0.02°C max. Breaking capacity: 60 V, 100 mA, 1 W max. Reference junction............................... Uncertainty due to the internal reference junction: ± 0.05°C max. Temperature coefficient: ± 0.005°C/°C max. | |||||||
