عضویت 
ورود اعضا
راهنمای خرید
NPM-D30 pages
Our Solutions, Your Value
Model ID
NPM-D3
Lightweight 16-nozzle head 12-nozzle head 8-nozzle head 2-nozzle head Dispensing head
No head
Lightweight 16-nozzle head
12-nozzle head
8-nozzle head
2-nozzle head
Dispensing head
Inspection head
NM-EJM6D
NM-EJM6D-MD
NM-EJM6D-MD
NM-EJM6D
NM-EJM6D-D
NM-EJM6D-MA
NM-EJM6D-A
PCB
dimensions*
No head
Dual-lane mode
Single-lane mode
_NM-EJM6D
L 50 mm x W 50 mm ~ L 510 mm x W 300 mm
L 50 mm x W 50 mm ~ L 510 mm x W 590 mm
__NM-EJM6D-D
Dual-lane mode 0 S* *No 0s when cycle time is 3.6 s or less
•When selecting short conveyors
PCB
exchange _ „
time Single-lane mode 3.OS*
Electric source
Pneumatic source*
Dimensions *2
3-phase AC 200, 220, 380, 400, 420, 480 V 2.7 kVA
0.5 MPa, 1 00 L /min (A.N.R.)_
W 832 mmx D 2 652 mm*3 x H 1 444 mm*4
Mass
1 680 kg (Only for main body:This differs depending on the option configuration.)
Placement head | Lightweight 16-nozz | High production mode[OFF] | 12-nozzle head (With Dual Heads) | 8-nozzle head (With Dual Heads) | 2-nozzle head (With Dual Heads) | |
Placement speed | Max. speed | 84 000 cph(0.043 s/chip) | 76 000 cph(0.047 s/chip) | 69 000 cph(0.052 s/chip) | 43 000 cph(0.084 s/chip) | 11 000 cph(0.327 s/chip) 8 500 cph (0.423 s/QFP) |
IPC9850 (1608) | 63 300 cph *5 | 57 800 cph*5 | 50 700 cph*5 | |||
Placement accuracy(Cpk^ 1) | ±40 A/m/chip | ±30 urn / chip (±25jum/chip)*6 | ±30 ym / chip | ±30 Aim/chip ±30ym/QFP □12mm ~ °32m ±50ym/QFP o] 2 mm Under | ±30um/QFP | |
Component dimensions (mm) | (01005") 0402 chip*? toL6xW6xT3 | 03015"*7*a/(01005") 0402 chip *7 toL6xW6xT3 | (01005") 0402 chip*? toL12xW12xT6.5 | (01005")0402 chip*? toL32xW32xT12 | (0201") 0603 chip toL100xW90xT28 | |
Component supply | Taping | Tape : 8 / 12 / 1 6 / 24 / 32 / 44 / 56 mm | Tape:8 to56/72/88/ 104mm | |||
8 mm tape : Max. 68 (8 mm thin type single feeder, double tape feeder, small reel) | ||||||
Stick.Tray | Stick: Max. 8, Tray: Max. 20 (per tray feeder) | |||||
Dispensing head | Dot dispensing | Draw dispensing |
Dispensing speed | 0.16 s/dot (Condition: XY=10 mm, Z=less than 4 mm movement, No 8 rotation) | 4.25 s/component (Condition: 30 mm x 30 mm corner dispensing)*i3 |
Adhesive position accuracy(Cpkfe 1) | ± 75 jum/dot | ± 100 urn/component |
Applicable components | 1608 chip to SOP.PLCC.QFP.Connector.BGA.CSP | SOP.PLCC.QFP.Connector.BGA.CSP |
Inspection head | 2D inspection head (A) | 2D inspection head(B) | |
Resolution | 18 um | 9 urn | |
View size | 44.4 mm x 37.2 mm | 21.1 mm x 17.6 mm | |
inspection Solder lnspection*g | 0.35s/ View size | ||
time | Component Inspection-s | 0.5s/ View size | |
Inspection object | Solder lnspection*9 | Chip component: 100 um x 150 um or more((020V)0603 mm or more) Package component: 0150 ym or more | Chip component: 80 jum x 120 um or more ((01005")0402 mm or more) Package component: 0120 um or more |
Component Inspection's | Square chip ((0201 ")0603 mm or more), SOP, QFP (a pitch of 0.4 mm or more), CSP, BGA.AIuminum electrolysis capacitor. Volume, Trimmer. Coil. Conneotor'io | Square chip ((01005")0402 mm or more), SOP, QFP (a pitch of 0.3 mm or more), CSP. BGA.AIuminum electrolysis capacitor. Volume. Trimmer, Coil, Connector'io | |
Inspection items | Solder lnspection*g | Oozing, blur, misalignment, abnormal shape, bridging | |
Missing, shift, flipping, polarity, foreign object inspections | |||
Inspection position accuracy (Cpte 1 hs | ± 20 yum ± 10 Aim | ||
No. of inspection | Solder Inspection's Component Inspection's | Max. 30 000 pcs./machine (No. of components : Max. 10 000 pcs./machine) | |
Max. 10 000 pcs./machine | |||
"Placement tact time,inspection time and accuracy
values may differ slightly depending on conditions
*Please refer to the specification booklet for details,
*1: Due to a difference in PCB transfer reference,
a direct connection with NPM (NM-EJM9B) /
NPM-W (NM-EJM2D) dual lane specs cannot be
established.
*2 : Only for main body
*3 : Dimension D including tray feeder: 2 683 mm
Dimension D including feeder cart: 2 728 mm
*4 : Excluding monitor and signal tower
*5 : It is the reference value of the tact time by the IPC9850 conformity.
(The independent mode)
*6 : ±25 iim placement support option. (Under conditions specified by PFSC)
*7 : The 03015/0402 mm chip requires a specific nozzle/feeder.
*8 : Support for 03015 mm chip placement is optional.
(Under conditions specified by PSFC : Placement accuracy ±30 iim I chip)
*9 : One head cannot handle solder inspection and
component inspection at the same time,
'10: Please refer to the specification booklet for details,
"11: Foreign object is available to chip components. (Excluding 03015 mm chip)
'12: This is the solder inspection position accuracy measured by our
reference using our glass PCB for plane calibration.
It may be affected by sudden change of ambient temperature.
'13: A PCB height measurement time of 0.5s is included.
/^Safety Cautions | |
• Please read the User's Manual carefully to familiarize yourself with safe and effective usage procedures. | • To ensure safety when using this equipment all work should be performed according to that as stated in the supplied Operating Instructions. Read your operating instruction manual thoroughly. |
Panasonic Group products are
built with the environment in mind.
http://panasonic.net/eco/
Panasonic Group builds Environmental Management System in the
factories of the world and acquires the International Environmental
Standard ISO 14001:2004.
inquiries-
Panasonic Factory Solutions Co.,Ltd.
Corporate SMT Division
1375 Kamisukiawara, Showa-cho, Nakakoma-gun, Yamanashi 409-3895,
TEL +81-55-275-9152
FAX +81-55-275-6269
All data as of December 1, 2013
Ver.December 1, 2013
©Panasonic Factory Solutions Co.,Ltd.2013
IChanges in specifications and appearance may be made without notice for product improvement.
•Homepage http://panasonic.net/pfsc/
►Recycled paper is used this Catalog.
Panasonic
2014
PSnSSOHIC Electronics Assembly System
catalog
PRODUCTION MODULAR
/VR/Irl
NEXT PRODUCTION MODULAR
Manufacturing Process Innovation
Model Name
NPM-D3
Model No. NM-EJM6D
Model No. NM-EJM6D-MD Model No. NM-EJM6D-D
Model No. NM-EJM6D-MA Model No. NM-EJM6D-A
LNB conveyor + 3 production modulars in-line setup
C— *lt may not conform to Machinery Directive
C and EMC Directive in case of optional
^ configuration and custom-made specification.
"
