ABS Catalog0 pages
VDE
HIGH ENVIRONMENTAL
RESISTANCE
TURQUOISE SWITCHES
ABS TYPE
FEATURES
19.3
• Subminiature size (19.8×11.1×6.4 mm)
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classication
• Elastomer double molding technology, an industry rst and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
• We offer a Au clad 2-ply contact type (for small loads) that we developed
specically for small current and voltage loads in the range of 1 mA to 100 mA
and 5 V to 30 V.
• UL/CSA/VDE/SEMKO approved
(AS for Au-clad twin layer, VDE and SEMKO are not approved.)
* Based on the protective construction classication of IEC, items which satisfy the test
requirements are denoted with an IP designation.
6.4
11.1
TYPICAL APPLICATIONS
• Automotive
• Home appliances (vacuum cleaner, air purier)
• Others (gas cooking range)
RoHS compliant
ORDERING INFORMATION
Ex. ABS
Type of
switch
Wire and
terminal
position
1
Terminal
ABS:
1: Straight type 1: .110 quick-connect
Turquoise 4: Right angle
terminal
switch
5: Left angle
4: Solder terminal
S type
5: PC board terminal
6: Wire leads
Remarks: 1.
2.
3.
4.
5.
1
1
0
4
0
3
Operating
force by
Contact*
Agency standard
pin plunger
(max.)
1: SPDT
0: Pin plunger
4: 0.98 N
0: AgNi alloy
3: UL/CSA/VDE/SEMKO
2: SPST-NC 1: Short hinge lever 5: 1.47 N
1: Au-clad
(AgNi alloy contact,
3: SPST-NO 2: Hinge lever
triple layer
Au-clad triple layer type)
3: Long hinge lever
4: Au-clad
9: UL/CSA
4: Simulated roller
double layer
(Au-clad double layer type)
lever
6: Roller lever
8: Leaf lever
Contact
arrangement
Actuator
Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
SPST-NC and SPST-NO are only available for wire leads type.
Leaf lever is only available for wire leads type
Wire leads type with agency standard will be discontinued from August 31, 2012.
As for wire position:
Straight type
Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
* Contact
0: AgNi alloy
1: Au-clad triple layer
AgNi alloy
Au-clad
AgNi alloy
CuNi alloy
Panasonic Corporation
Automation Controls Business Unit
4: Au-clad double layer
Au-clad
CuNi alloy
industrial.panasonic.com/ac/e
AECTB2E 201201-T
"