pulseCheck USB
The autocorrelator pulseCheck USB is a versatile
instrument for measuring the pulse width of
different fs and ps laser systems with the ability
to cover a broad wavelength range using different
Optics Sets1), which can be upgraded in the eld.
The pulseCheck USB with pulseLink controller
combines the standard pulseCheck optical head
with the new pulseLink controller replacing
the standard control unit of the pulseCheck.
It controls the measuring process, while being
connected via USB to the Control Software running
on the customer’s computer.
Enabled by a special scanner design and a realtime position measurement system the instrument
offers a linear time scale and different factory
calibrated scan ranges. In combination with a high
resolution digitization and fast processing, the
pulseLink provides the measured autocorrelation
function and pulse width data at a high refresh
rate and with a very high precision.
Furthermore the center wavelength of the input
laser beam is derived from the interferometric
autocorrelation data. Using an external trigger
the measuring process is also optimized for the
measurement of low repetition rate lasers.
The included Control Software allows for easy data
export for further analysis.
1) An Optics Set consists of a mounted non-linear crystal as well as a
detector. When upgrading Optic Sets, please ask A·P·E or distributor for
details.

• Autosetup
crystal tuning | signal amplication
• Trigger input - for broad variety of trigger signals
• High resolution data acquisition - 16 bit
• High speed real-time measurement
Watch the pulseCheck and
pulseLink videos at the support
area of our website
www.ape-berlin.com

• USB 2.0 full speed interface to PC
Please see pulseCheck USB MIR data sheet for a
wavelength range from 2 ... 20 μm.
Compatibility of the Control Software with Windows 8 operating system is being tested.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.