TAP-3120-M120 pages

"

Industrial Wireless Access Point EN50155 Wireless Access Point

nnnn

vl.1 / Aug, 2011

nnnn

TAP-3120-M12

nnnn

. > Industrial EN50155 Dual-RF IEEE 802.11 a/b/g and IEEE 802.11 b/g wireless.

nnnn

access point with 2xlO/100Base-T(X), Ml2 connector

nnnn

Features

nnnn

Leading EN50155-compliant wireless access point for rolling stock applications

nnnn

Dual high Speed Air Connectivity: each WLAN interface supports up to 54Mbps

nnnn

link speed

nnnn

Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/WPA2-

nnnn

PSK(TKIP,AES)/802.1X Authentication supported

nnnn

Supports X-Roaming < 100 ms

nnnn

Supports wireless load balance

nnnn

Supports Dual AP/Dual CIient/Bridge/AP-CIient Mode

nnnn

Provides dual-RF which support IEEE 802.11 a/b/g and IEEE 802.11 b/g dual

nnnn

band for wireless communication

nnnn

Dual redundant Ethernet ports support Ethernet redundant mode (Recovery

nnnn

time < 10ms) and switch mode in M12 connector (D-coding)

nnnn

Wireless connecting status monitoring

nnnn

Secured Management by HTTPS

nnnn

Event Warning by Syslog, Email, SNMP Trap and Relay output

nnnn

Ultra-rugged enclosure for toughest industrial usages

nnnn

Wall Mounting enabled

nnnn

Introduction

nnnn

ORing's Transporter series access point is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications.

nnnn

TAP-3120-M12 is a reliable Dual-RF IEEE802.11 a/b/g and IEEE 802.11b/g WLAN Access Point with 2 ports LAN which is fully compliant with EN50155

nnnn

certification. TAP-3120-M12 access point use M-series connectors to ensure tight, robust connections, and guarantee reliable operation against environmental

nnnn

disturbances, such as vibration and shock. TAP-3120-M12 provides dual-RF wireless interfaces, which can provide IEEE 802.11 a/b/g and IEEE 802.11 b/g

nnnn

dual band wireless communication and can be applied to fulfill any demands of wireless applications. TAP-3120-M12 can be configured to operate in Dual

nnnn

AP/Dual CI ient/Bridge/AP-CI ient mode. TAP-3120-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of

nnnn

Ethernet switch ports. You are able to configure TAP-3120-M12 by WEB interface via LAN port or WLAN interface. Therefore, TAP-3120-M12 is one of the most

nnnn

reliable choices for rolling stock applications on the wireless network.

nnnn

40

nnnn

www.oring-networking.com

"