1:1 NET-Ready Optical Protection Switch Subsystem0 pages
R1. 20070410
1:1 NET-Ready Optical Protection
Switch
A (1:1) optical protection system provides two diverse routes for the same link. On
detection of a failure, the receiver end signals the transmitter end via a signaling
channel. First the transmitter end and then the receiver end switch onto the
protection connection. The (1:1) NET-Ready protection switch in 1x2 or 2x2
switch configurations provide this type of protection. The same switch fits both
point-to-point and shared protection switching ring architectures.
NET-Ready (1:1) protection switch provides both Manual and Automatic switching
mode. In Manual mode, the system switches optical path only based on the
commands from user. In the Automatic mode, the system switches based on the
power level detected and the pre-set threshold. Under automatic mode, the system
can be set to be Revertive or Non-revertive modes. Under Revertive mode, the
system switches back to the working path automatically after the fault condition is
cleared. Under Non-revertive mode, the system does not switch back.
Alarm and switching threshold and hysteresis are programmable remotely or locally.
Independent of Data Rate,
Format and Wavelength
Highly Configurable to Fit
Network Applications
Simple, Plug-and-play
Installation
User-definable Thresholds
and Hysteresis
User-selectable Revertive
and Non-revertive Modes
Latching Optical Switch
Remote Configuration
Through SNMP Management
Interface
Front Panel LED and
Remote Alarm
NET-Ready (1:1) protection switch provides remote system configuration and
management through SNMP. Web GUI and CLI is also provided for user to manage
the system locally via Ethernet or craft RS-232 interface respectively.
(1:1) Protection
Multiple Control Modes
Programmable Threshold and Hysteresis
Remote Management and Alarm
1:1 Net-Ready Platform
Features
Oplink Communications, Inc.
In today’s network, protection switching at optical layer is a subject of great
importance to the carriers. As a member of Oplink’s NET-Ready product family,
Oplink’s NET-Ready series protection switches offer various protection schemes
against fiber cuts and network failures. .