angle seat valveS0 pages
valvole a flusso avviato
angle seat valveS
V2
Versioni in AISI 316:
ARES da 3/8” a 2”;
ATENA versione compatta
(disponibile su richiesta e per quantità) da 3/8” a 3/4” con attuatore ø40.
AISI 316 Versions:
ARES from 3/8” to 2”;
ATENA compact version
(available on request and depending
from the quantity) from 3/8” to 3/4”
with actuator ø40.
ZEUS: Versione in bronzo da 3/8” a 2”
ZEUS: bronze versions from 3/8” to 2”
PN 25
PN 16
caratteristiche tecniche
SPECIFICATIONS
fluido intercettato
- aria, acqua, alcool, olii, carburanti, soluzioni saline, vapore, ecc..
(comunque compatibili con AISI 316 o Bronzo RG5)
- Pressione di utilizzo da 0 a 16 / 25 bar (vapore a 180°C da 0 a 10
bar) in funzione della misura e della versione scelta (vedi pagine
seguenti).
- Temperatura da -10°C a +180°C.
- Viscosità massima 600 cst (mm2/s).
Operating media
- Air,water, alcohol, oil, petroleum products, saline solutions,
steam, etc. (as long as compatible with AISI 316 or Bronze RG5).
- Pressure from 0 to 16 / 25 bar (steam from 180°C, from 0 to 10
bar) depending on the size and model chosen (see following
pages).
- Temperature from –10°C to 180°C.
- Max. viscosity 600 cst (mm2/s).
azionamento
- Fluido di pilotaggio: aria compressa lubrificata o secca, gas e
fluidi neutri;
- Temperatura ambiente: da -10°C a +60° C
Control media
Driving media: compressed air, lubricated or dry, gas or neutral
- media.
Ambient temperature: -10°C to +60°C
general features
- Threaded valve ends, as per ISO 228/1 and ISO 7/1 – other types
available on request.
- Assembling is possible in all positions: upright, flat or angled.
- Range available from 3/8” to 2” in the Double Acting versions,
Spring Return N.C. from above and below the plug, Spring
Return N.O. from below the plug.
- According to 97/23 EC “PED”
- ATEX version in conformity with directive 94/9/EC
caratteristiche generali
- Attacchi valvola filettati secondo ISO 228/1 e ISO 7/1 altri tipi di
attacchi a richiesta.
- Montaggio in ogni posizione: orizzontale, verticale, obliqua.
- Gamma disponibile da 3/8” a 2” nelle versioni doppio effetto,
semplice effetto normalmente chiusa da sopra e sotto l’otturatore, semplice effetto normalmente aperta da sotto l’otturatore.
- Conforme alla direttiva Europea 97/23 EC “PED”
- Versione ATEX in conformità alla direttiva 94/9/EC a
richiesta
Le diverse versioni degli azionamenti, le varie combinazioni della
valvola e la possibilità di intercettare il flusso da sopra o sotto l’otturatore, danno origine a molteplici versioni della valvola automatica .
Nelle tabelle seguenti sono elencate le versioni standard con i principali parametri di funzionamento.
In base al tipo di valvola ed alla variazione di pressione ∆P che deve
essere intercettata tra monte e valle della stessa, viene individuata
la pressione di comando necessaria all’azionamento e conseguentemente il codice della valvola corrispondente.
V2.1
on request
The variations in the actioning of the valve, the several combinations and the possibility to intercept the fluid from above or below
the plug, originate multiple versions of the automatic valve.
In the table below are indicated the standard versions with the
main parameters.
On the basis of the kind of valve and the variations of pressure ∆P
that must be intercepted, the necessary control pressure can be
individuated, and consequently, the code for the corresponding
valve.