Rotary Drive Torque gauge CENTOR0 pages
Rotary Torque Gauge
Measure and monitor your drive torque applications
The rotary torque gauge CENTOR EASY RD consists of a rotary
torque sensor. They have the ability to rotate and to measure torque
applied to rotating drives applications. Therefore they are ideals for
systems designed for continuous rotation, such as measuring the starting torque on an electric screwdriver or measuring the torque on
motor shafts. We offer a wide torque measurement range from 6Nm
to 150Nm, with a rotational speed up to 5000 turn per minute. The
Rotary Torque gauge Centor Easy RD is the perfect solution for all
your low and medium drive applications.
The Centor Easy gauges have a very large graphic display and show a
maximum amount of information for more efficient measuring: they
show the current reading and the peak value at the same time, and a
bar graph to show the operator whether they are close to their maximum capacity. if necessary, the backlighting can be used to further
enhance reading comfort. its advanced measurement chain enables it
to use a sampling rate of 1,000 Hertz with a resolution of 1/10,000 FS
and a total error of less than 0.5% FS.
A statistic feature is available on the Centor Easy models: the average
and standard deviation of the current batch are calculated and
displayed after each measurement. All the values of the production
batch are kept in the memory and can be sent to a computer by
RS232. The operator is spared any data entry, knows his results in real
time and saves everything at the end of the tests.
Many other functions complete the possibilities of the gauge:
- the Set point functions can be used to carry out “OK, NOK” tests:
a symbol appears on the display.
- The fully programmable RS232 output sends the data to a pC.
Designed for use in an industrial environment, it is an ideal
tool for tests during production.
Statistics
Statistics feature with automatic calculation of the average and standard
deviation on 100 values in the
memory.
Models and capacities
MODElS
CApACiTY
ACCURACY
RESOlUTiON
CNR ETRD 6
CNR ETRD 12
CNR ETRD 24
CNR ETRD 60
CNR ETRD 150
6 Nm
12 Nm
24 Nm
60 Nm
150 Nm
0.5%pE
0.5%pE
0.5%pE
0.5%pE
0.5%pE
0,6 mNm
1.2 mNm
3.6 mNm
6 mNm
12 mNm
Specifications
FEATURES
CENTOR EASY RD
Accuracy
0,5 % FS
Resolution
1/10 000 FS
Data acquisition rate
1 000 Hz
Overload protection
200% FS
Units
Nm, kgcm, mNm, lbin
Auto-off
Adjustable from 5 to 15 min
Bargraph
√
Clockwise and counterclockwise peak
√
Simultaneous display of peak and current reading √
Use of a Foot pedal
√
Tare function
√
programable set point
√
Statistics
√
FEATURES
CENTOR EASY RD
internal memory
Maximum speed rotation
Reversible display
Operates on rechargeable batteries
8 hours of operation without recharging
Fast charge
Metal casing and protective overmould
Threaded fixing holes on the back
RS232 output
Data rate
Digimatic output
Analogic output
Backlit display
100 results
5000 rd /min
180 °
√
√
√
√
√
Current value, min or max
50 values per second
√
+/- 1V
√
ANDilOG Technologies - Bp 62001 - 13845 Vitrolles Cedex 9 , FRANCE • info@andilog.com •
phone: +33 (0) 820 888 202 • Fax: +33 (0) 820 888 902