Dial Indicator applications0 pages
Inspection Instrument for Dial Indicator
Comparison measuring instruments which ensure high quality, high accuracy and reliability.
i-Checker
SERIES 170
An inspection certificate is supplied as standard.
Refer to page IX for details.
The i-Checker is specially designed to
calibrate dial indicators, dial test indicators,
and other electronic comparison gage heads
with a stroke of up to 100mm (4").
•t±(0.2+L/100)µm indication accuracy.
•tDirectly inspects an indicator with a
stroke of up to 100mm (4"). The dial
test indicator, bore gage and lever-type
inductive head can be inspected with
optional accessories.
•tAdjustment of the measurement position
is very easily accomplished because of
semi-automatic measurement and fully
automatic measurement functions.
•tCreates and prints out a simple inspection
certificate.
•tSaves inspection results as a CSV file for
analysis by software.
Technical Data
Measuring Range:t100mm/4"
Resolution:t
0.02µm/0.8µin
Accuracy:t
±(0.2+L/100)µm in vertical position
(at 20°C)t
±(0.3+2L/100)µm in lateral positiont
L = arbitrary length (mm)
Drive method:t Electric motor
Measuring Unit:t Reflective-type glass linear encoder
Thermal expansion coefficient: (8±1)X10-6/K
Measurementt Semi-automatic / Fully
method:t
automatic*
Dimensions:t
184 x 225 x 532mm (W x D x H)
Operating temperature range: 20°C±3°C
Power supply:t 100VAC to 240VAC ±10%, 50/60Hz
Mass:t
20kg/44.1lbs
*t Automatic measurement requires the indicator's connection cable.
Additionally some form of indicator, along with a connecting machine (the
optional accessory for indicator as a Digimatic power-supply unit on EF
counter) will be needed.
Functions
Inspect your analog indicator semi-automatically!
The pointer of the analog indicator is positioned just
before the measuring point automatically via Mitutoyo’s
Semi-automatic Measurement function. After that,
inspection begins simply by adjusting the pointer position
with the jog-dial. Because of this
function, measurement time is reduced and user fatigue is practically
eliminated. Additionally all functions
necessary for inspection are combined in the control box so that the
operator need not rely on excessive
eye movement to adjust the pointer.
Automatic
transfer
1. Press of data button
Inputs the current position data and
moves spindle just before the next
measurement position automatically.
Automatic
transfer
Note: It is possible to specify the scale
graduation increment so that spindle
movement and data transfer are
performed automatically.
SPECIFICATIONS
Order No.* Remarks
170-311
with ø8mm bush
170-312
with ø3/8” bush
Fully automatic inspection of digital indicator
The Automatic Measurement
function, in tandem with a digital
indicator makes the spindle move so
that measurement data is acquired
automatically. Therefore, manual adjustment to the measurement position is unnecessary and the efficiency
of every inspection is enhanced.
*tTo denote your AC power cable add the following suffixes to the order No.: A t
t for UL/CSA, D for CEE, E for BS, K for EK, No suffix is required for JIS/100V
*tCalibration certificate and traceability system chart are attached as atandard.
DIMENSIONS
Create and printout a simplified inspection certificate
It is possible to create, edit and print out your own inspection certificate. Furthermore, that data can be saved as a
CSV file.
Unit: mm
180
Applicable Indicators
•t Dial indicatort
•t Hicatort
•t Digimatic indicator***t
532
*t
*t
**t
***t
Optional Accessories
•t Test indicator*
•t Bore gage**
•t Linear gage
requires optional test indicator attachment set.
Contact the nearest Mitutoyo sales office for testable indicators.
requires optional bore gage accessory.
requires optional SPC cable for fully automatic measurement.
352
F
182
211
225
2. Positioning by Jog-dial
3. Press of data button
Inputs the current position data and
moves spindle just before the next
measurement position automatically.
160
184
Using test indicator attachment set (02ASK000)
F-71
02ASK000:t Test indicator attachment set (ø6mm stem)
02ASK180:t Test indicator attachment set (ø8mm stem)
02ASK370:t Test indicator holder (ø6mm stem)
02ASK380:t Test indicator holder (ø8mm stem)
02ASL310:t Accessory for Bore gages
902803:t ø6mm dovetail grooved stem
902804:t ø8mm dovetail grooved stem
02ASK040:t Stem bush ø6mm
02ASJ856:t Stem bush ø8mm
02ASK150:t Stem bush ø8mm, short
02ASL150:t Stem bush ø10, short
02ASK050:t Bush ø9.5 (Requires 02ASK070)
02ASK060:t Stem bush ø12mm
02ASK070:t Stem bush ø15mm
02ASK080:t Stem bush ø20mm
02ASK710:t Stem bush ø28mm
02ASK090:t Stem bush 3/8”
02ASK130:t Stem bush case
02ASK730:t Reflector
937179T:t Foot switch
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.