JCP 1724 Jet Cleaner0 pages
JCP 1724 Jet Cleaner
Remove Polymers and Compounds
from Metallic Parts
Suitable for removing from metal
parts and extrusion hardware all
types of thermoplastic and
thermoset compounds in a safe,
ef cient manner without the use
of cleaning media.
ene ts
Capable of removing most
polymeric materials
Fast cleaning cycle
Simple operation
Reliable and maintenance-free
operation
Gentle cleaning extends part life
Operator safety
Energy-saving operation
Labor saving
FEP - OPTIONAL UNIT AVAILABLE
Safety
Since cleaning takes place under
vacuum, combustion does not
occur. This feature provides a high
degree of operator safety and the
parts are equally protected from
excessive or localized high temperatures, insuring freedom from
annealing and stress cracking.
The Model JCP 1724 Jet Cleaner with working dimensions of 15 ½ “ and
23 ½” depth (393.7 mm and 596.9 mm) depth represents one of the most
popular model sizes of the Nordson XALOY Jet Cleaner product line.
It is ideally suited for small to intermediate size cleaning applications. All Nordson XALOY
Jet Cleaners utilize heat and vacuum to remove material such as thermoplastic from
metal parts. In most cases cleaning cycles are accomplished within 120-240 minutes
at an operating temperature range between 800°F and 900°F (426.7°C and 482.2°C)
and a vacuum of 25 inches (635 mm) of mercury. The unit can be easily installed in
any area having available facilities of water supply, water drain and electrical power.
Operation
are heated in an oxygen starved
depressurized and the heaters
chamber where the polymer melts
and vacuum pump shut down.
Cleaning is totally automatic.
and drains into the primary trap
The operator then simply opens
Environment
The operator loads the parts into
collector pan. Remaining polymer is
the chamber door, removes the
Clean your tooling by removing
material, not burning it away.
Cleaning in an oxygen starved
chamber eliminates combustion
and minimizes environmental
impact. Consult our Environmental
Report for additional details.
the parts tray, moves the carriage
vaporized and then water scrubbed
cleaned parts, checks and cleans
assembly to the operating position,
in a secondary trap where conden-
the traps if necessary and the unit is
secures the door, sets the cycle time
sates are collected in a secondary
ready for another cycle.
and temperature, starts the unit and
trap basket. At the end of the
walks away. The parts to be cleaned
cycle the chamber is automatically
"