MEG® II Compact Spray Gun0 pages
MEG® II Compact Spray Gun
nnnnCompact electric spray gun for container coatings with ultra
nnnnhigh-speed response enabling fast operation and high accuracy.
nnnnFeatures and Benefits
nnnn■ Fast response provides more open time for each spray
nnnncycle, which allows higher film weights when desired
nnnnand lower operating pressures.
nnnn■ Cool operation contributes to the fast response time
nnnnand minimizes film build-up inside the gun, reducing
nnnnmaintenance.
nnnn■ No internal metal-to-metal friction for less wear,
nnnnlonger service life and cooler operation.
nnnn■ On-line gun-module replacement speeds maintenance.
nnnnThe Nordson MEG* II compact electric gun provides the fast,
nnnnaccurate application of solventborne and waterborne can lacquers
nnnnto two- and three-piece containers, ease in disassembling the
nnnnfront end of the gun, and employs safety features for flammable
nnnnspray materials. The MEG II gun is also ideal for exterior
nnnnbottom-spray applications.
nnnnFast Response Time, Reliable Operation
nnnnConsistent, repeatable fast open and close times provide more
nnnnfull-open time for each spray cycle. This allows for faster operat-
nnnning speeds when desired and can allow lower operating pressures
nnnnfor less bounceback of applied coating. Repeatability provides
nnnnmore consistent spray weights, reduced material waste and
nnnncleaner operation.
nnnnThe MEG II compact spray gun has no internal metal-to-metal
nnnnfriction points, contributing to a faster response time, and
nnnnreducing wear and heat generation in the gun. The coil and
nnnnarmature assembly is specially designed to create less heat than
nnnnother electric guns for reliable operation and longer wear of
nnnnthe parts. The overall cooler operation of the gun reduces film
nnnnbuild-up inside the gun and minimizes valve sticking.
nnnnEase of Maintenance and Repair
nnnnThe ball-and-seat assembly is designed to minimize wear, which
nnnngreatly extends the product life of the gun. When repairs are
nnnnneeded, the gun module can be replaced on-line for minimal
nnnndowntime. The gun body has been designed with "flats" to grab
nnnnwith a wrench for easier maintenance, and the seat holder has an
nnnnindexing ability so the seat can be rotated to promote uniform
nnnnwear on the contact points of the coil face. Altogether the gun
nnnncontains few moving parts to simplify rebuilding and minimize
nnnnreplacement-part inventories.
nnnnThe semi-captured nozzle o-ring provides a reliable seal. The
nnnngun spray-end design holds the seat assembly from twisting
nnnnwhen installing or removing a nozzle. This speeds installation
nnnnand guards against damage to the gun caused by over-tightening
nnnnof the nozzle nut.
nnnnNordson
"