OptiMix II0 pages
OptiMix II
™
Plural Component Metering System
Plural component unit for lacquering and coating.
The OptiMix II system is a robust, high-performance,
multi-purpose plural component painting and coating
unit with a freely adjustable mixing ratio. It incorporates
an innovative electronic control system that provides high
proportioning accuracy, making the OptiMix II system
ideal for most any application in general industry or trade.
The unit allows the rapid change of up to 16 different paints
and lacquers. It can be used for low as well as high pressure
spraying. The OptiMix II system processes paints of various
viscosities at outputs from a few ounces up to several gallons
per minute. If needed, the system can also be used as a
single-component spray unit for added versatility.
Features and Benefits
t Electronic controls provide high proportioning
accuracy.
t Allows the rapid change of up to 16 different paints
and lacquers.
t Ideal for low- and high-pressure spraying.
t Accommodates paints of various viscosities at
outputs from a few ounces up to several gallons
per minute.
Technical Specifications
Volumetric mixing ratio
0.5:1 to 17:1
Pressure ratio
10:1 to 52:1
Proportioning tolerance
Max. spray pressure
Areas of Application
Output per cycle (depending
on pump combination)
t Automatic and manual painting lines
Controllable valves
t Furniture industry
Output at 40 cycles (depending
on pump combination)
t Industrial coatings
max. 3%
up to 6032 psi (416 bar)
up to 72 cm3
2.4 fl oz
4 (6)
1:1 to 1.5 gal/min (5.7 l/min)
4:1 to 1.0 gal/min (3.6 l/min)
10:1 to 0.8 gal/min (3.1 l/min)
t Machine and vehicle manufacture
Input voltage
t Steel construction and structures
Max. air inlet pressure
116 psi (8 bar)
Dimensions (L x W x H)
28 in x 35 in x 55 in
(700 mm x 900 mm x 1400 mm)
Weight (depending on version)
115/230 V
265 lbs (120 kg)