MicroTest HS-P0 pages
Micro Test HS
www.microcut.ch
Measurement precision (repeatability and reproducibility)
720 Measurements on 30 parts with 2 different
equipments and 4 different users has been made
with MicroTest machines. Setup done by the
different users.
Average Standard Deviation:
MicroTest HS-P: 0.042 um
Average Distribution:
MicroTest HS-P: 0.123 um
1.20
1.00
0.80
0.60
0.40
0.20
0.00
1.1 | |
0.43 | |
0.12 | 0.2 |
old generation
MicroTest HS-P
Average Distribution
Max Distribution
Measurement trueness
This diagram shows the average absolute difference
of measured value of MicroTest Machine to certified
master form measuring machine (Taylor Hobson Taly
Rond) (calculated concentricity value only)
Please note, that MicroTest value include ID and
partial OD roundness aspects which are relevant for
performance of connector
15 different work pieces with concentricity value
from 0.2 to 1.7 um (average 0.9 um) have been
measured 3 times.
Measurement Accuracy
(precision + trueness)
Based on the superior precision and the proven true-
ness of measured values, best accuracy of MicroTest
HS-P is given.
0.3
0.25
0.2
0.15
0.1
0.05
0.00
0.17 |
0.12 |
0 |
master reference MicroTest HS-P
old generation
user benefits
Minimize cost per measurement
■ Increase throughput
■ Minimized cycle time -> less amount of equipment; less labour cost
• Measure under industrial condition dose to fabrication
• Minimized setup and calibration time {assisted setup)
■ Maximized reliability and accuracy (less re- testing and comparison testing)
• choose specific machine fitting your needs
Increase value of measurement
■ Improvereliabilityandaccuracyofmeasurement
■ Dirt tolerant tactile measurement
• Measure close to function (Measure inside the bore at defined depth of termination)
• Document your measuring results automatically and easily
■ Make sharp margins in between categories
• Use the market reference measuring machine
Avoid hidden costs because of ID angle problems
■ measure the angle of bore in order to have better image of the performance of your finished product:
- The angle of the ID has at the concentricity a significant Impact on
the performance of an FO Ferrule.
■ Analyse your injection mould tool before producing bad blanks
■ Detect blanks- problems before machining them costly
• Detect ID angle problems on your Ferrule before terminate the connector costly
sr 0
Subject to modifications
microcut
SWITZERLAND
Microcut Ltd
Rolllweg21/RO. BOX 448
CH-2543 Lengnau BE
Switzerland
Phone +41 (0)32 654 15 15
Fax +41 (0)32 65415 16
E-Mail info®microcut.ch
Web www.microcut.ch
concentricity I roundness I bore angle testing
The MicroTest HS-series allows
a precise and automatic qualification
of small cylindrical parts with
relevant concentric geometries.
A success story in ferrule
concentricity testing continues with the
latest Microcut® development.
"