Smart Cluster Kit0 pages

nex onar Smart Cluster Kit

Art.No. NX-998-T02

Configuration

• 3DListener, 2x

• Triplet NX-016-T04

• USB connection cable (2 m), 2x

• Floor stand NX-050-T02, 2x

• Stand adapter NX-054-T01 (Adapter %"-> M10) 2x

• Positioning arm NX-053-T00

incl. contacts NX-054-T02, 2x

• Ballast bag, 2x

• Software nexonar Motion Visualizer

• Equipment rack, NX-052-T00 (rectangular bar 40 x 40 x 1500

mm)

• Case

• Total weight ~ 10 kg

Options

• Pre-configured PC

• nexonar Beacons, different versions

• nexonar Hard Probe

• Technical adaption corresponding to customer requests

Price

5.600,00 Euro

Use

The nexonar 3DListener analyzes the impulses emitted by the

nexonar beacons on the run-time principle and generates 3D

absolute coordinates which it forwards via USB to the PC based

measuring application software, nexonar Motion Visualizer. Up

to four beacons can be calculated by the

integrated 3DListener electronics.

From the front of the 3DListeners the measu-

ring area is ~ 160° at a distance of 200-1500

mm at a frequency of 40 kHz. More 3DLi-

steners can be connected through clustering

to increase the meaurement area.

Quick setup

1. Place the floor stand on a solid base at the desired height.

The tripod legs can be individually adjusted for height and

fixed with the quick-lock fasteners.

2. Now, to increase stability, hang the ballast bag, filled with

water, from the bottom of the screw in the center column

of the tripod.

3. Connect the stand with the cross beam (rectangular bar).

4. Place both alignment arms on the stand and fix them them

with the quick-lock fasteners.

5. Now plug the nexonar 3DListener on the end of the arm,

fix this with the quick-lock fastener and carefully check the

connection.

6. Connect each nexonar 3DListener to your PC, using the USB

cable.

7. You can now start your PC (important - not before all

devices are connected).

8. On your PC, install the nexonar Motion Visualizer software.

The built-in device driver is installed automatically.

9. nexonar Motion Visualizer starts automatically and measure-

ment operations can begin.

Technical changes reserved.

PC requirements on request.