عضویت 
ورود اعضا
راهنمای خرید
LOADING
i/iX Series II 0 pages
نسخه متنی
"
"
| #9 California Instruments | |||||||||
| iX and i Series II Power Systems 3-15 kVA Programmable AC and DC Power Source / Analyzer | |||||||||
| Pow | Intergrated System The iX Series II represents a new generation of AC and DC power source that addresses increasing demands on test equipment to perform more functions at a lower cost. By combining a flexible AC/DC power source with a high performance power analyzer, the iX Series II systems are capable of handling complex applications that have traditionally required multiple instruments. The sleek integrated approach of the /X Series II avoids the cable clutter that is commonly found in AC test systems. The i/iX Series II is rackmountable with a 4U chassis design. All connections are made internally and the need for external digital multimeters, power harmonics analyzer and current shunts or clamps is completely eliminated. Using a state of the art digital signal processor in conjunction with precision high resolution A/D converters, the iX Series II provides more accuracy and resolution than can be found in some dedicated harmonic power analyzers. Since many components in the iX Series II are shared between the AC/DC source and the power analyzer, the total cost of the integrated system is less than the typical cost of a multiple unit system. For less demanding applications, the i Series II provides similar output and transient capabilities as the iX Series II, as well as basic measurements. Easy To Use Controls Both the iX Series II and i Series II are microprocessor controlled and can be operated from an easy to use front panel keypad. Functions are grouped logically and are directly accessible from the keypad. This eliminates the need to search through various levels of menus and/or soft keys. A large analog control knob can be used to quickly slew output parameters. This knob is controlled by a dynamic rate change algorithm that combines the benefits of precise control over small parameter changes with quick sweeps through the entire range. Applications With precise output regulation and accuracy, the iX Series II AC and DC sources address many application areas for AC and DC power testing. The iX also provides a high load current capability, multi or single phase output modes, and built-in power analyzer measurements. Additional features including line distortion simulation (LDS), arbitrary waveform generation, and programmable output impedance address requirements for product quality and regulatory compliance testing. | ||||||||
| Combination AC and DC | |||||||||
| Source and Power Analyzer Replaces multiple instruments with a single multifunction unit | |||||||||
| Capable of handling a wide range of loads with 0 to 1 power factor User defined voltage waveform and distortion programming Analyze frequency and time domain of both voltage and current on all phases Built in voltage and current waveform acquisition capability (iXSeries II) Meets source requirements for IEC Harmonics and Flicker testing Powerful, yet easy to use, program୭ming software included (also includes Avionics test software). Provides additional current at lower voltages (See current voltage curve) | |||||||||
| www.california-instruments.com | |||||||||
| ISO 9001:2000 | |||||||||
