LUXELL SERIES - Linear MWIR arrays0 pages

LUXELL SERIES
Linear arrays and high-speed scanning modules
LUXELL FPAs
Components with no readout electronics
New Infrared Technologies
LUXELL CORE MODULES
Modules for integration
LUXELL FPA (64/128/256 px)
LUXELL CORE-HS
The LUXELL FPA is a linear array of detectors, and it’s available in three different sizes: 64, 128 and 256
pixels. The FPA has detection in the MWIR range (1 - 5 microns), and is operational at room temperature
with no need of cooling system.
The LUXELL FPA is suitable for scanning applications where high speeds of detection are required, as it
is capable of acquiring thousands lines per second.
The pixel geometry is dependant on the FPA size: 1,000 microns (100 microns pitch) for the 64&128 pixel
versions, and 600 microns (60 microns pitch) for the 256 pixel version. Readout electronics are not
included in the packaging.
The LUXELL CORE-HS is an electronic device based on a VIRTEX 4 FPGA that includes the FPA, the highspeed readout electronics required to achieve the best FPA performance, and Ethernet communications.
The LUXELL CORE-HS is compatible with any of the LUXELL FPA versions, including the model LUXELL
128 FPA WITH LVF for spectroscopy.
Each module has an IP-address which allows the transmission of the IR data captured to a host computer.
The LUXELL SOFTWARE SUITE included makes very easy to acquire data in multiple applications. An
specic software version is available for spectroscopic measurements using the FPA with LVF.
Optimal system for integration
The LUXELL CORE-HS module
is compatible with all
the LUXELL FPA models and
allows high acquisition
speeds (up to 20000 lines
per second).
Left - The CORE module
Right - The CORE digital
electronics board
LUXELL 256 FPA
(256 px model)
LUXELL FPA pixel geometries
(left - 64/128 px model; right - 256 px model)
LUXELL 128 FPA for MWIR SPECTROSCOPY (3.0-4.6 m)
LUXELL CORE-S
The LUXELL 128 FPA WITH LINEAR VARIABLE FILTER is a
128-pixel linear array that incorporates a linear variable lter allowing
spectral discrimination, as each pixel behaves as a bandpass lter.
The FPA has hyperspectral detection in the MWIR range (3.0 - 4.6
microns), and is operational at room temperature with no need of
cooling system. The spectral information is provided simultaneously in
all the band (3.0 - 4.6 microns).
The LUXELL 128 FPA WITH LVF is suitable for spectroscopic
applications, as for example, gas detection.
The pixel has a rectangular geometry (1,000 microns size, 100 microns
pitch) and a spectral resolution of 60 nm. Readout electronics are
not included in the packaging.
The LUXELL CORE-S is an electronic device based
on a microcontroller architecture, which includes the
linear FPA, 2-channel readout electronics (1200 lines
per second max), USB 2.0 output and the LUXELL
SOFTWARE SUITE.
The system is plug and play, ready to read the FPA
signal and optimum for the development of very costeffective solutions based on the LUXELL FPA.
The LUXELL CORE-S is compatible with any of the
LUXELL FPA versions, including the model LUXELL
128 FPA WITH LVF for spectroscopy.
LUXELL 128 FPA WITH LVF
INCORPORATED
Main applications are
measurements with spectral
discrimination
Optimal system for low cost solutions
The LUXELL CORE-S module is a plugand-play device, includes the readout
electronics for the FPA and uses a
USB interface for control and data
transmission