Arcspray 150/S500-CL0 pages
Arcspray 150/S500-CL
ssue: 21/11-11
CLOSED-LOOP CURRENT CONTROL
In response to feedback from customers for a flexible system but with higher throughput, we have created the 500A,
ARC150/S500-CL system. The ARC150 system offers a great balance of controllable throughput with flexible operation
and the opportunity to have extended supplies packages up to 50m from the energiser to the pistol.
A number of new features are included to enable reliable spraying at 500A, 100% continuous duty cycle. These include
a new pistol front end with contact tips instead of solid tubes; uprated supplies / cooled conductors and terminals; a
heavy duty drive unit with new, v-shaped rollers; heavy duty flexible drive and a new 500A energiser with highspecification digital meters. These features combine to give a flexible, reliable and manageable solution for medium
and large scale thermal spray applications, producing quality, fine surface finish coatings.
The ARC150 system is designed for anti-corrosion applications spraying zinc, aluminium and their alloys but can also be
used to spray other materials commonly sprayed in larger applications such as high temperature alloys.
500A capacity = high productivity
10 and 20m supplies packages (max wire feed)
Closed-loop current = simplicity / reliability
Extension supplies to extend up to 50m
Uses 2.3/2.5mm anti-corrosion wires
Easy to setup and maintain = high productivity
1.6mm setup for high termperature alloys
MIG, hardboard reel and drum dispense
Air cooled cables = lightweight
New heavy duty drive unit and rollers
Flexible pistol manoeuvrability
New contact tips = reliability at higher current
New 500A energiser with digital display
100% duty cycle = reliability and productivity
Material
Reference
Wire Diameter*
Maximum
Throughput
kg/hr (@ 500A)
Zinc
02E
2.3mm
51
0.82
Aluminium & Alloys
01E/17E/25E
2.3mm
12
2.88
21E
2.3mm
44
1.00
28E
2.3mm
12
3.85
72E
1.6mm
13.6 (300A)
1.02
Zinc/Aluminium
85/15
ARCTEC Non-slip
coating
High temperature
alloys
All figures are approximate and will vary with specific spray parameters
www.metallisation.com
+44 (0)1384 252 464
Maximum
Coverage
m²/kg/100µm
Typical Applications:
Structural Steelwork
Oil/Gas platforms
Pipes and vessels
Internal vessel / boilers
Gates / fences
Architectural fabrications
Bridges