ta5000 Gas Purity Monitors0 pages

ta5000 Gas Analyzers
Trace Level Gas Monitoring for Bulk Gas, Environmental and
Research Laboratory Applications
RGD (Reduction Gas Detector)
Detection limit 3 ppb*
►t ta5000F
Detects CO2, Methane and NonMethane Hydrocarbons
FID (Flame Ionization Detector)
Detection Limit 3 ppb*
* t Detection limits may vary with each
application
►t Cost efficient maintenance and
operation
►t Best value and performance
►t Expandable with multipoint
stream selector
Tradition of Excellence
Following a tradition of excellence in
trace level gas detection, the ta5000
delivers analytical solutions for
environmental monitoring, industrial
process control and high purity gas
monitoring applications.
as isoprene, ethylene or ethylene
oxide. The FID configuration is
widely used for determination of
CO2, methane and non-methane
hydrocarbons (NMHC) in ambient
air, water headspace, bulk gases or
process gas streams.
The ta5000 is equipped with an
internal sample processing
channel followed by either a
Reduction Gas Detector (RGD)
or Flame Ionization Detector
(FID). The RGD configuration
is a worldwide standard for
determination of hydrogen and
carbon monoxide in air research,
environmental samples, process
control and bulk gas purification
facilities. The RGD is also used
as an ambient air monitor for
unsaturated hydrocarbons such
Figure 1. Propylene sample with
trace level of H2 and CO
www.ametekpi.com
Backflush
Detects H2, CO and Unsaturated
Hydrocarbons
►t Broad detection range
Ethylene several hundred ppb
►t High sensitivity
Carbon Monoxide 11 ppb
►t ta5000R
Features
Hydrogen 52 ppb
The Trace Analytical ™
ta5000, manufactured by
AMETEK Process Instruments,
is a family of instruments
designed to monitor trace
levels of specific impurities
in bulk gases, environmental
applications and research
applications. All ta5000
instruments include a
dedicated sample processing
system, a single high sensitivity
detector, and on-board analysis
electronics. There are two
models of ta5000. Containing
a different detector, each
model is used to monitor a different
selection of impurities.
Inject
TRACE ANALYTICAL
TM
PROCESS INSTRUMENTS