AUTOMATIC FEEDER0 pages
Tube length up to 20 meters
(optional)
Complete access to the electrical panel
thanks to its lateral rotation system
Constant hot melt level in the tank
GLUING
SOLUTIONS
The vibrator facilitates flow of adhesive
Automatic maintenance of a constant hot
melt level in glue tank
The ‘meler’ automatic feeding system ensures
continuous maintenance of a constant hot
melt level in the glue tank, avoiding that way
the manual refilling by the machine-operator.
Every time that the tank sensor detects a low
adhesive level, a signal is sent to the suction
system, that then feeds a charge of pallets
of hot melt directly from the adhesive bag
or container to the glue tank. This charge is
indicated by a lighting signal. When the sensor
detects the correct hot-melt level, the transfer
is stopped (you can program a delay time for
disconnection).
Alarm Signal
An alarm signal, with a delay time since low
level detection, advises of a possible failure
in the transfer or an empty glue container
or bag. An intermittent light and acustic
alarm are activated simultaneously. The
acustic signal can be interrupted pushing
the corresponding button. Once the failure
is corrected, you can reset the system by
pressing the ‘RESET’ button.
automatic
feeding
system
Avoid hot-melt pollution and char
The system ensures a constant hot melt level
in the tank avoiding a premature charring
of the glue. Thanks to the completely closed
transportation system the glue remains
unpolluted (less cleaning maintenance) and
you reduce the operations for the recharge of
the system.
Installation
You can install the system to all ‘meler’
systems and also to other systems. We supply
the feeding system (control, filter, sensors and
suction tube) together with the adaptor kit for
the specific system. You can also order a 120L
container for major autonomy of the gluing
unit.