Controllers EDU series 0 pages
36016 Thiene (VI) Italy
P.IVA 02103900243phone +39.0445.371068fax +39.0445.371069
www.kolver.it kolver@kolver.it Categoria articolo: Controllers EDU series Descrizione categoria articolo All the FAB, RAF and Pluto series screwdrivers work in combination with a control unit acting as an AC to DC transformer and torque controller.The electronic control circuit cuts the power supply to the motor as soon as the pre-set torque has been reached. Heavy duty construction for industrial environment with as many options as you can name (soft start, adjustable speed, torque signal,screw depthcontrol, number of cycles control, remote start, remote reverse, multiple outputs, etc.) position these controllers at the top of their class.The INSPECTOR is a PLC based process control system that monitors the fa-stening assembly process: EDU1FR/PLC for the FAB and RAFseries;EDU1AE/PLC for the PLUTO driver.It compares the actual triggered torque time to a pre-set tolerance, ignoringjoints that fall out of theprocess window. It tracks, in real time, the comple-tion of each screw joint in an assembly, then notifies the operator upon itscompletion. It keeps asummary of good and incomplete assemblies through-out the production day.Additional features: Set up of number of screws for a complete cycle (1 to 99999) and display ofcompleted assemblies, total acceptable and rejected assemblies.? Set up of minimum fastening time in 0,1 sec. steps (to avoid the counting oftorque reached signals obtained re-fastening an already tied up screworfastening screws that stop before reaching the right position).
? Set up of maximum fastening time (to avoid the counting of strippedscrews).
? Remote starting and reversing (option).
? Output signals: torque reached, lever, cycle end and alarm (24 V 100mA).The multiple torque system is designed to expand the functionality of the PLUTO screwdriver and EDU1AE controller by enabling easy access tomultiple torque settings with one EDU1AE controller and one Pluto driver only. Among the various models, youՒll find a screwdriving systemwhich can control up to 8 different torque levels.
It consists of:
? Control unit EDU1AE with PLC (EDU1AE/PLC/CC)
? Socket tray 8 positions ? Pluto screwdriver. The operator inserts the bits he will use in his application into the corresponding position in the socket tray. Each position, marked from 0 to 7,refers to a program in the control unit where you set the required torque level. Every time the bit is taken out of a certain position, the unit willautomatically be ready to deliver the pre-set torque. In this way a single screwdriver can manage different torque levels very quickly, i.e. just the time necessary to replace the bit (few seconds). That ismade possible by the wide torque range of PLUTO15, namely up to 15 Nm. Let's see the system in detail: ? EDU1AE control unit with PLC monitors all the functions of the system. It is provided with a double display to help its use and programming.The PLC is directly connected to the bit holder box from where it receives the signal of "bit selected". The keys of the PLC are used to set thetorque values. ? The bit holder (socket tray) unit is supplied with 8 x 3mm holes. Customer will then adapt the holes to his needs. On request the holes can becustomized according to the customer's specifications. In case the operator extracts simultaneously more than one bit, the system will signal themistake and stop the screwdriver. The position of each bit/socket is marked by a laser marking for an easy and indelible identification or through alabel. As an alternative to the socket tray, a switch box can be used (see Accessories). Lever pressed and torque reached signals as well as start andreverse contacts come standard and on request a serial port for data downloading is also available. Dati identificativi degli articoli
Modello Code Features Dim. mm. Weight kg. For screwdrivers EDU 1FR 010010/FR In: 90-230V ac out: 18-27 dc - power 120VA - slow start and adjustable speed 130 x 118 x 67 0,6 Series FAB and RAF EDU 1FR/SG 010010/FR/SG like above - input: start and reverse contacts Output: torque reached & lever signal 130 x 118 x 67 0,6 Series FAB and RAF EDU 1FR/PLC 010010/FR/PLC like above - with programmable system, operating instructions 135 x 115 x 135 1,2 Series FAB and RAF >
"