C2-BL 210/B0 pages
KeConnect C2
C2-BL 210/B Bus Link Module
•
•
•
CAN Bus link module
For transmission from KeConnect C2
module islands
Specified according to CANopen
Brief description
The C2-BL 210/B is a CANopen bus link module from the Keba module system. In combination with
I/O-modules the bus link can be used for the decentralization and transmission range of module
islands. These module islands can be connected with all central processor modules within the product
lines of the KeControl system, if these central processor modules are equipped with a CAN-Interface.
The bus link module works on the basis of CANopen and supports all communication types of this
protocol. It connects the CAN bus system with the modularly extendable I/O-modules of the
KeConnect C2 system. A 24V power supply terminal supplies the bus link itself as well as all the
modules added-on to it.
The module has two address switches at the front, with which the CAN node address can be set. The
current transmission rate is also set through a baud rate switch that is accessible from the front.
Depending on the line length a baud rate of up to maximally 1 MBit/s (25m) can be set. The CAN
connection is via a 9-pole D-Sub plug. The module’s status is indicated via a status LED.
Version 1.1, material no. 1000833
© KEBA 2009
1
"