Ultra Deckblaster - Waterjet Surface Preparation, Coating Removal Tool0 pages
ultra
deckblaster
Jet Edge’s Ultra Deckblaster is specifically designed for ultra-high pressure
(UHP) waterjet surface preparation, coating removal, and light scarification
on flat surfaces such as concrete floors and steel decks.
Typical applications include removal of polyurethane paint or nonskid
coatings from factory floors, ship decks, paint booths, and parking ramps are
typical applications. The Ultra Deckblaster also removes accumulated spillage
such as grease, oil and overspray.
The self-propelled Ultra Deckblaster operates at pressures up to 55,000 psi
(3,800 bar) with UHP water and hydraulic power supplied by a Jet Edge
intensifier pump. Hydraulic pressure activates the motor to spin the spray
bar assembly and open a highflow water valve supplying fluid to the manifolds. The water travels through a high-pressure on/off valve and high-speed
swivel before entering the rotating spray bar.
Multiple jet orifices direct UHP water over an 18 inch (46 cm) wide cleaning
path as the Ultra Deckblaster advances. The spray bar accepts a variety of
standard jet manifolds offering the flexibility to handle a multitude of
applications.
The functional "lawnmower style" design gives the operator total control of the rotation speed, drive speed, forward/off/reverse, water
and rotation on/off of the spray bar for precise operation. Easily accessible knobs control forward/reverse and bar rotation speeds. A
manually actuated valve does not allow operation of any function unless the safety lever is depressed. The hydraulic-powered wheel
drive (self-propelled drive) offers additional operator control and comfort and can be easily disengaged for free-rolling applications. The
spray bar height is adjustable by using a tension handle at the front of the Ultra Deckblaster.
Options & Accessories
· Special orifice manifoldswith multiple
orifices in various paterns
· 0-3,000 rpm spraybar rotation
· 2, 3 and 4 multi-angle tips
· Straight orifices
· Multiple spray bar designs
Specifications
•
•
•
•
•
•
•
Overall height (at handle)
Overall length
Width
Weight (approx)
Cleaning path
Cutting bar speed
Travel Rate with optional wheel drive
37.5 in. (96.5 cm)
66.5 in. (169 cm)
22 in. (56 cm)
280 lb (127 kg)
18 inches (457 mm)
Variable 0-1500 rpm
Variable to 60 fpm (18.3 mpm)
Standard Features
· Hydraulic drive
· Vacuum connection
· Rubber skirt
powered by jet edge!
The Ultra Deckblaster
is powered by a
Jet Edge waterjet
intensifier pump.
Rev. 7/2011
1
Model iP55-280DS
MADE IN THE
12070 43rd St. N.E. St. Michael, MN 55376 USA
www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com