Round Transvectors0 pages

Q

Air Amplifiers for Vacuum,

Blowoff, Cooling or Conveying

Round Transvectors® use a small amount of filtered compressed air to deliver a large

airflow for a wide range of conveying, ventilation, drying and cooling applications. The

high-flow, bladeless blowers don't require machine guards and are especially useful for

removing metal chips and scrap, ventilating fumes or smoke, and conveying small parts,

pellets, powders and dust. As a vacuum or blowoff device, these air amplifiers are more

compact and less expensive than variable-speed blowers and fans, provide instant on/off performance, and operate at low

noise levels to meet OSHA requirements. Round Transvectors® are easily mounted and, with no moving parts to wear out or

break, are virtually maintenance-free. Used in ducted and unducted applications, Round Transvectors® are available in several

sizes, in both aluminum and stainless steel, and can deliver

flow rates from 32 to 2300 SCFM.

Tranvectors' wide range of applications include

• Convey any material that can be moved in an airflow

including grain, plastic pellets, sawdust, powder,

capsules, metal chips, paper and cloth trim, lint, dust,

small parts, stamping scrap and lead shot.

• Ventilate and exhaust welding, soldering and

machine smoke, auto exhaust, plating tank fumes

and other gases.

• Cool, clean or dry molded parts, castings,

food products, etc.

• Weigh sort pharmaceuticals and other light

materials.

Induced

Air Flow

Compressed Air

y Entrained

Transvectors use the impulse

principle to achieve amplified

airflows. When compressed air

enters the Transvector, it fills a

chamber that has only one exit

path - a 0.002" (0.051 mm) annular

orifice. As the air is forced out of the

orifice, it accelerates and collides

with surrounding air entraining a

great volume of free, ambient air.

The result is a large volume of

output air in return for a small

amount of compressed air.

Significantly smaller and less expensive

than variable-speed blowers or fans

Instant on/off - no moving parts

Airflow and output easily adjusted

No guards or safety hazards

Quiet — meets OSHA noise requirements

Easily mounted, ducted and moved

Outperforms Venturis and ejectors

No electricity, explosion hazard or RF interference