IF-AdvancedReal3DRotationUnit0 pages
Real3D
How to measure undercuts
In combination with Real3D, users measure sur-
The fully motorized version can additionally be
faces from numerous perspectives. Components
applied for the automatic measurement of cut-
are measured in 3D from various perspectives
ting dies, micro hole measurement and Reverse
and then automatically merged into a full 3D
Engineering. Further, users are able to measure
dataset. High-precision and calibrated rotation
trail and main edges of their drill, cutting miller
and tilt axes ensure automated, repeatable and
etc. in only one measurement circle.
REAL3DROTATION UNIT
General specifications
Rotation axis
360° endless rotation; motorized
Tilt axis
- 15°to + 95°, locking every 5°; manual
on the whole measurement object. Users are
clamping systems allows for precise and rapid
such as diverse flank angles, thread pitch and
interaction between processing and measure-
undercuts.
ment. In addition, various adapters enable 360°
<0.5 µm
Clamping systems: three-jaw lever scroll chuck; ER16 collet chuck
The compatibility of both units with a number of
able to visualize and measure surface features
0.1 Nm
Squared roundness measurement error
(using a ø 6 mm calibration pin)
Compatibility
traceable measurement of form and roughness
Max. torque rotation axis
rotation and components without rotational
Alicona offers several options for Real3D mea-
Measurement object
Max. weight
0.5 kg
Clamping diameter
0.5 mm - 40 mm (three-jaw chuck); 1 mm - 10 mm (collet chuck)
Clear aperture
12 mm (three-jaw chuck); 12.5 mm (collet chuck)
Max. length
150 mm (three-jaw chuck and collet chuck)
symmetry.
surements. The Advanced Real3D Rotation Unit
How does Real3D work?
is equipped with a motorized tilt axis and motorized rotation axes, whereas the Real3D Ro-
The component is measured at various rotation and tilt angles. Based on the registered true color information of each measurement point, the single measurements
are transformed into a joint coordinate measurement system. The single, overlapping measurements are then precisely merged into a complete 3D data set.
tation Unit is based on motorized rotation axes
and a manual tilt axis. Both models are used for
full form measurement of typically round tools.
ADVANCEDREAL3DROTATION UNIT
General specifications
Rotation axis
0.5 Nm
Max. torque tilt axis
2.5 Nm
Squared roundness measurement error
(using a ø 6 mm calibration pin)
<0.5 µm
Clamping repeatability
2 µm (3R and EROWA)
Compatibility
The Advanced Real3D RotationUnit is used in combination with InfiniteFocusG5.
Users benefit from calibrated motorized tilt and rotation axes and measure form
and roughness on the whole measurement object.
-15° to +90°; motorized
Max torque rotation axis
The Real3D Rotation Unit, here with InfiniteFocusSL,
is equipped with motorized rotation axes and a
manual tilt axis.
360° endless rotation; motorized
Tilt axis
Clamping systems*: three-jaw lever scroll chuck; 3R-SP26771 MacroHP; EROWA ITS Chuck 100P
* Other clamping systems available upon request
Measurement object
Max. weight
23.5 mm (three-jaw chuck)
Max. length
alicona I Real3D
2 mm - 71 mm (three-jaw chuck); up to 100 mm (3R and EROWA)
Clear aperture
22
4kg
Clamping diameter
268 mm (three-jaw chuck), 155 mm (3R), 149 mm (EROWA)
Real3D I alicona
23
"