INKOMA - products0 pages

Products
Screw jacks / bevel gearboxes:
Couplings:
SGT high performance screw jack ALBERT
PK coupling
Static load capacity from 5 to 2000kN
Torque transmission between parallel shafts
with radial offset
ALBERT SDA - Spindle direct drive actuator
Lineflex coupling
Static load capacity from 12,5 to 100kN
Torque transmission between parallel shafts
with positive or zero radial offset
HSG screw jack (cubic design)
Inkoflex coupling
Static load capacity from 2,5 to 500kN
Torque transmission with flexible compensation for
angular and small radial offset between shafts
KSH bevel gear high speed screw jack
Inkocross coupling
Static load capacity from 15 to 90kN
High speed and high efficiency range
Torque transmission with compensation for angular and
radial offset between shafts, proportionate compressive
and tensile
HSGK high performance screw jack
KSO coupling
Static load capacity to 1000kN
For increased duty and higher linear speeds
Cruciform disc coupling (Oldham system),
torsionally stiff offset coupling
DSH screw jack
Elaflex coupling
High efficiency direct drive system with torque motor
The range of INKOMA screw jacks
consists of screw jacks and bevel
gear jacks. INKOMA screw jacks
and high speed bevel versions are in
cubic construction and are available
with trapezoidal or ball screw
spindles. Bevel jacks are used for
high linear speeds and for high
application duty.
High-performance screw jacks with
cooling fins for a particularly robust
construction.
KL spiral bevel gear units
Bevel drives with Klingelnberg
palloid spiral cut bevel gears match
INKOMA screw jacks in terms of
their dimensions. Use as bevel
gears with hollow or insert shaft.
INKOMA shaft-hub connections are
ready-made solutions for the
transfer of rotary motion, torque and
axial sliding motions in a range of
different sizes and designs:
Inkoturn coupling
Rotary encoder coupling for true transmission of angular
position, with compensation for radial offset and angular
misalignment
• P3G Polygon profile DIN 32711
• P4C Polygon profile DIN 32712
• Spline profiles in accordance
with DIN 5463 / ISO14
• as shafts, hubs, clamp rings and
sliding naves
KG bevel shaft mounting right angle gear units
For direct mounting onto the HSG screw jacks
Shaft hub connections
P3G and P4C Polygon profiles, Splined profile
and muff couplings
ALBERT ASN System-solar linear actuator
Friction locking bushes
Specifically designed for solar power systems
The couplings fulfil a variety of
compensation criteria such as
compensation for radial offset, for
angular misalignment, damping of
radial vibrations, torque transmission
despite tensile stress and compression,
absorbing shocks.
Direct drive spindles with high
degrees of efficiency. Perfectly suited
for highly-dynamic applications
where frequencies reach the hertz
range. Positioning and repeatability
is accurate to micrometres.
Positive torque transmission with combined damping
of shock and vibration
With Klingelnberg spiral bevel gears for efficient
transmission of high torque
The range of INKOMA coupling
products mainly consists of inhouse-developed and patented
couplings.
Mechanical clamping elements for keyless
connection between shafts and hubs
ALBERT manufactured spindles
Inkobrake-brakes
Trapezoidal or buttress threaded spindles. Rolled, machined
or whirled with custom designs available upon request
Spring applied brakes
Torque capacity from 4 to 400Nm
Linear actuators
Sub-contract machining services
Industrial design for dynamic compressive
and tensile loads
Manufacture of precision machined components
to customer specification
INKOMA - GROUP Headoffice
Sitz der INKOMA-Maschinenbau GmbH
Neue Reihe 44
D-38162 Schandelah
INKOMA-GROUP
phone:
+49 (0)53 06 - 92 21- 0
fax:
+ 49 (0)53 06 - 92 21-50
e-mail:
info@inkoma.de
internet: www.INKOMA-GROUP
.com
INKOMA - GROUP
INKOMA ALBERT A - I - M