RT Series0 pages

RT Series Trolley
1 metric ton Capacity
Plain and Rigid
RT010 Series Trolley Specifications
Cousin to the PT Series trolley, the twin suspension shaft RT Series trolley offers a rigid
connection for the MLK, MLKS and MLKR Series of air chain hoists. Like the PT Series, the RT
Series uses universal tread wheels for use on flat or tapered flange beams.
Trolley
part no.
Capacity
Fits beam
Min. turning
metric tons flange width (in.) radius (in.)
1/4 - 1
RT010
221/32 - 6
36
Note:
Wheels have universal tread for use on flat or tapered beams.
12-5/8"
1-1/32"
5-9/16"
4-1/16"
2-1/4"
5-3/8"
5/8" Dia. bolt
1-5/8"
3"
BC Series Beam Clamp
1 – 10 metric ton Capacity
Beam Clamp features:
Beam Clamps provide a temporary or permanent mount to a wide range of tapered or flat
beams. These units have been designed and verified, by actual pull testing, to achieve
minimum design factor of 5:1 for vertical lifting with powered or manual hoist meeting ASME
B30.16. Quick and simple installation is achieved by hand without tools. Units accommodate
hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are
designed to reduce beam stress by applying the load inside of the flange edge.
• Quick installation by hand.
• Low headroom design adjust to fit a wide range of flat or tapered beams.
• Meets ASME B30.16 for use with powered or manual hoists.
• Each unit is serialized, supplied with a test certificate and manual.
• Metric rated for vertical lifting at 2200 lbs per ton.
BC Series Beam Clamp specifications and dimensions (in.)
Model
no.
Capacity
metric tons
Weight
lbs
Beam width
A
B
C
D
E
F
BC-1
1
4
215/16 - 91/16
33/16
8 3/ 4
4 - 65/16
1 1/ 8
13/16
BC-2
2
5
215/16 - 91/16
3 5/ 8
8 3/ 4
4 - 65/16
1 1/ 8
7/ 8
BC-3
3
9
35/32 - 125/8
4 5/ 8
103/4
6 5/ 8 - 9 1/ 2
27/16
15/16
BC-5
5
11
39/16 - 125/8
413/16
103/4
6 5/ 8 - 9 1/ 2
2 3/ 8
13/16
BC-10
10
11
39/16 - 143/8
515/16
111/64
611/16 - 91/4
131/32
137/64
A
Trolleys
D
E
F
C
B
41