STATIPOWER® SP160 pages
®
STATIPOWER SP16
Transistorized Induction
Heating Power Supplies
Features/Benefits:
• 3, 10, 30 and 50 kHz with models available
from 50 kW to 1200 kW
• Rated for continuous or intermittent duty
• Variable ratio output isolation transformer
for load impedance matching
• Internal load matching capacitors for full
power operation over a wide range of
load conditions
• Input power factor is 0.95 under all
operating conditions
• Output regulation accuracy is ±1% of rated
power with ±10% line variance to ensure
precise process control
• Single control board. Field replaceable
without adjustment for easy maintenance
• Holding mode for consistent very low
power operation
• Restart circuitry eliminates nuisance
shutdowns caused by voltage transients,
ground faults and shorted or arching loads
SP16 150 kW / 30 kHz
Power Supply For General
Purpose Induction Heating
Unitized Design For
Stand-Alone Operation
Remote or Computer
Controlled Operation
The STATIPOWER® SP16 is designed
to match multi-turn coils (400- 2000 V)
that are used for multi-turn hardening
or tempering, tube heating, crystal
growing, wire and strip heating and
many other induction heating
applications. A wide variety of heating
coils can be properly matched with
built-in load tuning capacitors and
multi-tap output isolation transformer.
Simply connect three phase 480 V
input power, cooling water and
heating coil and you’re ready to
begin heating. The cabinets are
designed to accommodate a variety
of fixtures, conveyors and part
handling machines. Complete
stand-alone control and monitoring
include: Manual start/stop push
buttons, heat level control with
10-turn lockable dial, four meters
and annunciator lights to monitor
all operating parameters.
Remote control can be accomplished
by connection to the user interface
provided. Heat level can be controlled
by a remote potentiometer or 0-10 V
analog signal from a PLC. Options
include a 4-20 mA process control
signal or RS-232/485 interface for
remote computer monitoring, data
logging and control.
For more information, call 800/624-6297 or visit www.inductoheat.com