S6V0 pages

6” HYDRAULIC SUBMERSIBLE
SEWAGE / WASTEWATER PUMP
MODELS:
S6V (Ductile Iron Body)
S6VAL (Aluminum Body)
6” (150 mm) Discharge
The S6V is a 6" discharge sewage
pump. It is designed specifically to
easily pass through a 22" manhole
making it ideal for sewer by-pass jobs.
This pump is durable, compact and able
to pass large solids, stringy materials
and slurries with entrained gases.

S6V
S6VAL

FEATURES

•
•
•
•
•
•
•
•

SPECIFICATIONS

Semi Recessed Vortex Impeller
(will pass 5" semi-solids)

WEIGHT: S6V............................................. 247 lbs. (112 kg)

Compact Design allows this pump to fit
through a 21” opening

DIAMETER (@ widest point):...................... 20-3/4" (53 cm)

S6VAL......................................... 164 lbs. (74 kg)
HEIGHT:............................................................. 34" (86 cm)
DISCHARGE:....................................................... 6" NPT(F)
INLET FLANGE:.............................................. 6" 125# ANSI

Variable Speed hydraulic drive provides a
wide range of performance

SOLIDS HANDLING:.................. W/O Strainer..5" (125 mm)

Oil Lubricated Seals (can run dry)

HOSE PORTS:................................................. 1" (-16) SAE
PUMP BODY: S6V.............................................. Ductile Iron

Dependable gear type hydraulic motor
Can be bolted directly into a pipeline or
used as a booster pump
Safe Hydraulic Drive can be used where
electric power is hazardous or impractical

With Strainer..2-1/2" (63 mm)

S6VAL.......................................... Aluminum
IMPELLER:................................................... Stainless Steel
WEAR RING.............................................. ASTM A36 Steel
SHAFT:........................................... 17-4 PH Stainless Steel
SHAFT SEAL:.................................. Carbon / Ceramic (Std)
Silicon Carbide (Opt)
ELASTOMERS:................................................ Buna N (Std)
HYDRAULIC OIL:................ 214-320 s.s.u. @ 100°F (64°C)

Operates with our HT50 to HT75 power
units or other hydraulic power sources
capable of flows of 15 - 30 GPM

E0413

INPUT FLOW:............................... Max. 30 GPM (114 LPM)
OPERATING PRESSURE:............ Max 3000 PSI (204 Bar)
POWER SOURCE:...... Any Open Center Hydraulic System
Specifications are subject to change without notice

167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com
E-Mail: htpump@hydra-tech.com