عضویت 
ورود اعضا
راهنمای خرید
Illinois Capacitor is a leading manufacturer of aluminum electrolytic, aluminum polymer, metalized film and power film capacitors for electronics, along with super capacitors (EDLC or ultra capacitors) for an even wider range of applications. Through our close involvement with customers and suppliers, IC has been able to consistently deliver the components most needed for today’s high performance end products.
Illinois Capacitor is headquartered in the Chicago area, and has an Asian base in Hong Kong. Our ISO certified factories are strategically located in Asia and Europe. We maintain extensive inventories within the company and though an MKP0 pages
Small size – Safety Agency approved –
Metalized Polypropylene
FEATURES
APPLICATIONS
EMI filters – Line bypass – Across the line –
Antenna coupling
Operating Temperature Range
Capacitance Tolerance
AC voltage
(50/60 Hz)
-40°C to +110°C
+10% at 1 kHz, 20°C
UL/CSA
VDE
CQC
250/275/310
250/275/310
310
Tan δ
Dissipation Factor
at 1 kHz and 20°C
.1% Max
Capacitance
Insulation Resistance
@20°C (<70% RH)for 1 minute
at 100VDC applied
Self Inductance
Dielectric Strength
Life Expectancy
Humidity test
Impulse voltage
(24 pulses)
Capacitance temperature
coefficient
Construction
Electrodes
Coating
Lead terminations
Terminal to Terminal
Terminal to Case
>30000 MΩ at 100VDC
<0.33uF
15000 MΩ
>5000 MΩ at 500VDC
>30000 MΩ at 100VDC
>0.33uF
5000 MΩxuF
>5000 MΩ at 500VDC
<1 nano-Henry per mm of lead spacing and lead length
C<.0068uF, 1500 VAC or 2121 VDC applied for 60 Seconds
C>.0068uF, 1768VDC or 1000 VAC applied for 60 seconds
Terminal to Terminal
Cut-off current: 2A ac or 10mAdc
Current limiting resistance: 1Ω/V
2050VAC (50/60 Hz) applied between the terminals and case for 60
Terminal to case
Seconds and 20°C
1000 hours at 110°C at 125% of rated voltage with once every hour the voltage is
increased to 1000 VAC for 0.1 seconds
Capacitance change
<10% of initially measured value
Dissipation Factor
<1.0% at 1kHz
>100% of initially specified value (T-T)
Insulation Resistance
>3000 MΩ (Terminal to case)
500 Hours at 90 to 95% RH, 40C and no voltage applied after which the following
voltage will be applied for 1 minute to each capacitor.
C<0.0068uF 1500VAC, C>0.0068uF 1000VAC
Capacitance change
<10% of initially measured value
Dissipation Factor
<1.0% at 1kHz
>50% of initially specified value (T-T)
Insulation Resistance
>15000 MΩ (Terminal to case)
C< 1uF Vp=2.5kVDC
C> 1uF Vp=2.5kV √C
-200ppm/°C, +100ppm/°C
Metallized Polypropylene film
Vacuum deposited Metal layers
Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0)
tinned copper clad steel leads
