R700 pages

R70
Receiver for general use with digital and analogue outputs, including information feedback to the transmitter
with analogue and digital inputs
Receiver based on logic with digital outputs
– 13 manoeuvre relays – for combining with
modules with digital outputs – R8CAN – and
A2ICAN and A2VCAN analogue outputs.
Other modules that can be used for digital
inputs/outputs include:
• IN0-450P: digital pulse input -> for feedback
(e.g. to display the wind speed read on an
anemometer on the transmitter screen).
IN0-10: DC analogue input in the range of 0
to 10V DC (e.g. TO display the instantaneous
weight of the load of a bridge crane, from the
signal provided by a load cell).
• IN4D: 4 digital inputs (e.g. to display messages
on the transmitter display through the action of
signals from limit switches, limiters, etc.).
INCAN: card allowing a combination of input
cards:
• IN/OUT 0-4/20Ma: selectable current analogue input/output in the range of 0 to 20mA
and 4 to 20mA (e.g. flow control in the event
of current output/current loop for feedback
in current input).
- 40 + (4) IN4D card directly connected to LR72
max. of 44 digital inputs.
- 10 + (1) IN010V card directly connected to
LR72 max. of 11 analogue inputs (8-bit resolution).
- 10 + (1) IN450P card directly connected to
LR72 max. of 11 pulse signal inputs (0–450
pps).
The R70 receiver can be used with all of the
transmitters in the TM70 range: T70/1, T70/2,
T70/1HALL, T70/2HALL, T70/3, T70/4, and
with the i-KONTROL range.