Pressure sensor with choice of switch points or analogue values.0 pages
Fluid sensors and diagnostic systems
product news
Pressure sensor with choice of
switch points or analogue values.
PN7 pressure sensor
with communication interface
IO-Link 1.1.
Parameter setting, diagnosis and transmission of process values via IO-Link.
High switch point accuracy and
switching frequency.
Ceramic measuring cell for more than
100 million switching operations.
Dual independent switching outputs or
switching and diagnostic output.
Different versions with pressure ranges
between -1...600 bar.
PN7 pressure sensor upgraded with IO-Link
IO-Link is a simple, point-to-point, communication protocol between an IO-Link enabled device, such as a sensor or actuator, and an IO-Link master.
IO-Link advantages
The IO-Link circuit allows the process measurement data,
parameters and diagnostic information to be transmitted
using the standard connection cable. For example, the
pressure measurement can be transferred as a digital value
directly to the PLC. The measurement is more accurate,
free from conversion errors.
IO-Link masters can also store the set up parameters of
their sensors. If the original sensor is damaged, then the
IO-Link master will recognise its "blank" replacement and
automatically download the stored set up into the newly
connected sensor, saving time and avoiding errors.
fluid sensors
and diagnostic
systems
position
sensors
and object
recognition
bus,
identification
and control systems
PN7 pressure sensors in hydraulic and pneumatic lines