12XPB Specification Sheet0 pages
12XPB Series Fixtures
75 watt, 12VDC output, Hazardous Location Emergency System
Catalog Number
Comments
FEATURES
Type
Application
The 12XPB Series is a self-contained hazardous location
emergency lighting system which is designed for environments
known to have high concentrations of gas, explosive vapors
and dust. The 12XPB is intended for use in oil and gas refining,
chemical production and storage, grain processing and paint
manufacture. The 12XPB provides emergency illumination for
a minimum of 90 minutes in the event of power outage. Power
is only supplied to the external lamps when AC power is lost.
The 12XPB can be applied in the following enviroments:
Class I, Div. 1 & 2, Groups C, D
Class I, Zones 1 & 2, Groups IIB, IIA
Class II, Div. 1 & 2, Groups E, F, G
Class III, Div. 1 & 2
12XPB enclosure with integral
charger and battery pack
Construction
The XPB Series housing is made of copper-free(less than 0.4%)
aluminum with a baked on electro-statically applied epoxy for
maximum corrosion resistance. The housing contains lead acid
batteries which deliver 75 watts to power external 12VDC, 18 or 28
watt incandescent lamps for 90 minutes in the event of power outage.
The enclosure, lamp-heads and test station utilize ¾” connection. There
are 7 each -3/4” threaded holes in the enclosure.
Installation
Provided with 2 mounting holes at each corner for attachment to a wall
or other suitable surface. The housing contains 7 each ¾” drilled and
tapped holes for threaded conduit. Quick access to internal wiring
and circuitry through a threaded cover with supplied gasket. The
12XPB assembly includes a remote test station(push-to-test and AC
indicator) along with seal fitting, ¾” pipe nipple and sealing compound.
The lighting fixtures(ordered separately) can be pendant, wall
or ceiling mount.
Electronics
Voltage input through a heavy duty transformer at 120 or 277VAC
operation. Fully automatic solid-state charger which includes low
voltage disconnect to prevent deep discharge of the battery. Includes
six maintenance-free lead acid batteries to provide 12VDC output to
power up to 75 watts of load for 90 minutes. An AC-on indicator and
push-to-test station(sold separately) provides momentary testing
of the system.
ORDERING GUIDE
12XPB
75K
Series
Capacity
75K 75 watts for t
t
90 minutes
1
Time Delay Relay
Blankttt No TDR
TDR120t 120VAC input
TDR277t 277VAC input
To order the enclosure with charger and batteries only.
Operating Temperature
20°C to 30°C (68°F to 86°F)
Warranty
Full 3 year warranty
Compliances
UL924 Emergency Listed
UL844 Hazardous Location Listed
Power Consumption
120VAC- 15 Watts
Dimensions
"