عضویت 
ورود اعضا
راهنمای خرید
HR-PVC Rigid Injection Molding Machine0 pages
You production need is our promise.
Quality-Innovation & Industry-Alliance
I
Machine Layout
IR-PVC
IIS I
HR-PVC Professional Controller
HR-PVC &mwmm
pp.
HR-PVC series, equipped with advanced
technologies, fully computerized control, superior
efficiency and excellent performance, can satisfied
the demand of customer.
Hardness
The hardness of Huarong's alloy is well above Hv 800 or HRC
60, equivalent to that of high-end WC-based barrels and much
superior to commercial Ni-based bimetal barrels. The hardness
is uniform throughout the thickness of alloy lining, ensuring
Huarong's alloy good wear resistance down to its bimetal
surface. High temperature hardness measurement also shows
that Huarong's alloy still bears good wear resistance at elevated
temperature operations up to 400°C
TTB "alloy
■ WC composite centrifugal casting
■ Centrifugal casting
H" O HHHS3
□ m m
870SS}£^IJg§ #870SS Controller
Characteristics
Huarong's complex bimetal alloy barrels possess excellent wear
and corrosion resistance and high surface quality to reduce
production cost, by increasing injection efficiency and reducing
maintenance and down time. Huarong's alloy is especially
suitable for highly wearing and corrosive engineering plastics
used in advanced applications such as PVC fittings.
Typical features of TTB™ alloy
acking Lining Hardness Surface Inner diameter
Distance from backing steel surface.
SCM635
Stainless
steel
wear, anti-
corrosion
alloy
Resin | Characteristics | Appf cation | Standard | |||
UPVC | Unplasticized Poly Vinyl Chlorede cdor:transparent. gray, yellow. UPVC is anon-conducbrof electricity and non-subject to galvanic or electrolytic attack. Electrical equipments should notbe earthened to UPVC pipes | General Properties: a. specific gravity:1.38-1.43 gf/cm! b. water absorplion:<4 c. oxygen index <4 5 d. flammaoility:self extinguishing e. oxygen penelration<1 ■ Thermal Properties: a. heat disbrtbn bmperature @4.64 KgBcm2 (70-80 °C) heat disbrtbn bmperature @ 18.56 Kgf/cm2 (70-73 °C) b. max. operating temperature:60°C c. specific heat02 -0.28 caVg.? d. thermal conductivity:0.12 -0.14 KcalAn.h.? e. coeffident of linear expansion:6.7x 105-7.9x10-5cm/cm.? Mechanical Properties: a. tensilestrength® 23? :745-52 5 kgf/cm2 b. compressive sirenglh @ 23? 655-675 kgf/cm2 c. flexural strength® 23? :880-950 kgPcm d. impactstrength:4-6 KJ/m2 e. modulus ofelasticity@ 23? 2.9x10s-3.2 x10a kgf/cm2 f. relative hardness(rockwell):110-120 R ■ Ebctrcal Properties: a. volume resistivity: >1 x 10,4Ocm b. surface resistivity: > 1 x 1012Q c. powerfactor(at10 cydes):3.0 | • excelbnt and shock-resstance ■ shaking-bearing • high intensityof veneer • simpleandeasy for construction ■ high heat resistance ■ excelbnt warm-kept ■ nd ad here to the scab | 'soft UPVC: • toy ■ compose leather ■ gbvesand Origd UPVC: ■ cover for the cable ■ agriculture eledricapparatus ■ agriculture irrigation drainage ■ water supplyfor building • water drainagefor building ■ agriculture irrigation • ventilatbn system | SCH 40 | ASTM D-1784 for rigid UPVC compound ASTM D-1784 for rigid UPVC pipes(size Spressure) ASTM D-2466 for UPVC fittings |
SCH 80 | ASTM D-1784 for rigid UPVC compound ASTM D-1784 for rigid UPVC pipes(size Spressure) ASTM D-2464 for threaded UPVC fittings ASTM D-2467 for the socket UPVC fittinas | |||||
DWV | ASTMD-2655forUPVCpipes ASTM D-3033 for UPVC fittings ASTM D-3034 for UPVC fittings ASTM D-3311 for UPVC fittings | |||||
CPVC | Chbrnabd Poly Vinyl Chbrede color: transparent, arav velbw. CPVC is anon-conducbrof etectricitv and non-subject to galvanic or electrolytic attack. Electrical equipments should not be earthened to CPVC pipes. | - General Properties a. specific gravity: b. water absorption:7 gm/cm2 c. flammability:will not supportcombustion ■ Thermal Properties a. softening point93? b. coeffident oflinear expansion:83 x 10'5? Mechanical Properties a. ultimab tensib strength b. flexural strength c. impactstrength ■ Electrical Properties: a. volume resistivity: 101dohm/cm b. surface resistivity: 1012ohnVcm c. powerfactor(at10 cycbs):3.0 | • not inluence water quality ■ ebdrb insulatbn ■ simpleandeasy for construdion | • check valve ■ ballvalve ■ cover for the cable ■ water supplyfor building • water drainagefor building ■ agriculture irrigation drainage ■ communication apparatus ■ chemistry Iransporation for liquid orhot&warm wast wabrof 400 PSI or 10OP SI at 180? • ebdrb wiring system ■ fire control apparatus ■ hd water circulation of air conditbner piping ■ Piping in hotspring | SCH 80 | ASTM D-1784 for rigid CPVC compound ASTM F-441 for CPVC pipes(size & pressure) ASTM F-437 for threaded CPVC fittings ASTM F-439 for the socket CPVC fittings |
HUARONG PLASTIC MACHINERY CO., LTD.
Taiwan
Excellent Injection Molding Machine
HR-PVC
«Global Networks »
Russia j
^ Canada )
Israel )
^ Tunis )
Iran )
Maroc j
Ethiopia)
Taiwan Office
U.S.A. )
^ Mexico
Ecuador)
fSouth Africa
Quality-Innovation & Appreciated by Industry Alignment
http://www.huarong.com.tw
□ ilslS [Headquarter & Taiwan Factory)
74 5 5 5£ S ffi £ IS H ;'J> f§3 7-11S
No.37-1, Shalun, Anding Dist., Tainan City 74555, Taiwan.
TEL ■ +886-6-5939888 FAX : +886-6-5937698
E-mail:roy@huarong.com.tw
(Wuxi Factory)
Yuanda Road, Yizhuang Village, Guanlin Town, Yixing City, Jiangsu Province, China.
TEL ■ +86-510-87207622, 87203688 FAX : +86-510-87207619, 87207620
E-mail : wxhr1@live.cn
ED HI H III!*! (India Service Center)
1114, Chiranjiv Tower, 43, Nehru Place, New Delhi-110019, India.
f
HR-PVC Rigid
Injection Molding Machine
PVC 12B14.a
Certificate No: AJA01/3324
■■liMEB-niHni
Your production fulfilled is our promise I
Huarong motivate both to be worth .
"
