Handler_1900 pages
Handler 190
®
251091
March 2012
230V Wire Feed Welder
uilt with Hobart quality and durability, the
Handler 190 is a wire welding package with
industrial performance capable of operating on
230/240 volt circuits. The broad output range of
25 –190 amps allows you to weld 24 gauge up to
5/16 inch steel.
B
230 Volt
The Handler 190 is capable of running the following
wires: .023 –.035 in. (0.6 – 0.9 mm) mild steel or
stainless steel, .030 –.045 in. (0.8 –1.2 mm) fluxcored, and .030 –.035 in. (0.8 – 0.9 mm) aluminum.
Seven output voltage settings and infinite wire feed
speed control make the unit easy to set and adjust
for different materials, thicknesses and wires.
#500554
Includes:
Comfortable 10-ft. (3 m) H100S4-10 gun
10-ft. (3 m) work cable with clamp
Built-in gas solenoid valve and dual-gauge regulator with gas hose
Spool hub assembly accommodates 4 or 8 in. spools
Sample spool of .030 in. (0.8 mm) self-shielding flux-cored wire
.030 in. (0.8 mm) contact tips
Power cord with plug
Weld set-up chart
Owner’s manual with parts lists, installation, operation and
maintenance guidelines
An integrated spool
gun control circuit
allows direct plug-in
for the optional
Optional
SpoolRunner ™ 100
SpoolRunner ™
spool gun. The spool
100 Spool Gun
gun eliminates wire
feeding problems associated with soft aluminum
wire and also runs mild or stainless steel wire. A
selector switch for MIG gun or spool gun operation
makes switching guns quick and easy.
Features
Benefits
7 voltage selections, enhanced magnetics
and infinite wire feed speed control
Offers easier fine control of the output parameters for improved arc performance with less spatter for a better bead
appearance and less clean up.
Spool guns enhance feedability and reduce “bird-nesting” associated with soft aluminum wires.
Accepts uncomplicated, easy-to-install
direct plug-in SpoolRunner ™ 100 Spool Gun
Integrated spool gun control circuitry
is standard
No additional control box or adapter is required to connect the SpoolRunner 100 spool gun.
Door chart with initial settings
Quickly reference initial settings for different wires, gases, materials and thicknesses. Provides quick starting point for
novices and professionals alike.
Built-in contactor
Eases use and excellent safety feature which makes wire electrically “cold” until trigger is pulled.
Durable feed head with quick-release
drive roll tension lever
Positive feed with adjustable tension plus easy accessibility to thread new wire.
Convenient polarity changeover with
tip holder
Access makes it quick and easy to change polarity for solid or tubular wire. Includes convenient storage holes for
spare tips.
Dual-groove quick-change drive roll
Makes it easy to change from one wire size to another. One knurled groove and one smooth groove for
.030–.035 in. (0.8–0.9 mm) wire.
Short circuit protection
Protects unit against current overload.
Self-resetting thermal overload
Protects power transformer to ensure reliability.
Self-resetting motor protection
Protects wire feed system from overload, no fuses to change or circuit breaker buttons to reset.
Hobart's 5/3/1 Industrial Warranty
Five-year warranty on transformers, three years on electronics (drive motors, rectifiers) and one year on guns.