Handler 210 MVP0 pages

Handler 210MVP
®

250822
Jan. 2013

115/230V Wire Feed Welder

he Handler 210MVP is the one portable MIG
welder that has 210 amps of welding power
packed into a portable case! Powerful output to
handle 3/8 inch thick mild steel and enough
control for 24 gauge material.

T

115/230 Volt

The Handler 210MVP is recommended for
running the following wires: .023 –.035 in.
(0.6 – 0.9 mm) mild steel or stainless steel,
.030 –.045 in. (0.8 –1.2 mm) flux-cored, and
.030 –.035 in. (0.8 – 0.9 mm) aluminum. Seven
output voltage settings and infinite wire feed speed
control make the unit easy to set and adjust for
different materials, thicknesses and wires.

#500553
Includes:
Comfortable 10-ft. (3 m) H100S4-10 gun
10-ft. (3 m) work cable with clamp
Built-in gas solenoid valve and dual-gauge regulator with gas hose
Spool hub assembly accommodates 4 or 8 in. spools
Sample spool of .030 in. (0.8 mm) self-shielding flux-cored wire
.030 in. (0.8 mm) contact tips
Power cord with 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A)
MVP plugs
Weld set-up chart
Owner’s manual with parts lists, installation, operation and
maintenance guidelines

An integrated spool
gun control circuit
allows direct plug-in
for the optional
Optional
SpoolRunner ™ 100
SpoolRunner ™
spool gun. The spool
100 Spool Gun
gun eliminates wire
feeding problems associated with soft aluminum
wire and also runs mild or stainless steel wire. A
selector switch for MIG gun or spool gun operation
makes switching guns quick and easy.

Features

Benefits

Max 210 amps in small portable case

Sized for transport of the unit to the jobsite and the power to weld 3/8 in. mild steel.

7 (230 V) and 4 (115 V) voltage settings,
with infinite wire feed speed control

Offers easier fine control of the output parameters for improved arc performance with less spatter for a better bead
appearance and less clean up.

Spool guns enhance feedability and reduce “bird-nesting” associated with soft aluminum wires.
Accepts uncomplicated, simple-to-install
direct plug-in SpoolRunner ™ 100 Spool Gun
Integrated spool gun control circuitry
is standard

No additional control box or adapter is required to connect the SpoolRunner 100 spool gun.

Dual-voltage capability with
MVP™ (Multi-Voltage Plug)

Allows you to connect to common 115 or 230 V power receptacles without the use of any tools — simply choose the
plug that fits the receptacle.

Door chart with initial settings

Quickly reference initial settings for different wires, gases, materials and thicknesses. Provides quick starting point for
novices and professionals alike.

Built-in contactor

Eases use and excellent safety feature which makes wire electrically “cold” until trigger is pulled.

Durable feed head with quick-release
drive roll tension lever

Positive feed with adjustable tension plus easy accessibility to thread new wire.

Convenient polarity changeover with
tip holder

Access makes it quick and easy to change polarity for solid or tubular wire. Includes convenient storage holes for
spare tips.

Dual-groove quick-change drive roll

Makes it easy to change from one wire size to another. One knurled groove and one smooth groove for
.030–.035 in. (0.8–0.9 mm) wire.

Short circuit protection

Protects unit against current overload.

Self-resetting thermal overload

Protects power transformer to ensure reliability.

Current-limited motor protection

Protects wire feed system from overload, no fuses to change or circuit breaker buttons to reset.

Hobart's 5/3/1 Industrial Warranty

Five-year warranty on transformers, three years on electronics (drive motors, rectifiers) and one year on guns.