Circular connector0 pages
1
MS type Lower Profile Plug
H/MS Series
NEW
2004.6
Features
1. 20% Height Reduction
When compared with existing H/MS Series connectors
the overall height of plug assemblies is lower, allowing it
to be used in space constrained applications.
2. Cable Exit in 360° Directions
The cable can exit in any of the 8 fixed direction, in 45°
increments.
3. Simple Assembly
The 2-piece design consisting of the contact/insulator
assembly and the back-shell assembly allows termination
without the use of any specialized tools.
4. Water and Dust Protection
IP 67 rating when fully terminated and mated with
corresponding part.
5. TUV Certification
Provided with a protective circuit function for TUV
certification. The (D) pin is directly connected to the
outside metal case.
Applications
Factory automation equipment, robotic equipment, servo
motors, and a wide variety of industrial and measuring
instruments.
Plug
(45°)
Can be changed
in 45 degree increments
Connector Height Comparison
Existing MS Connector Lower-profile Plug
22-22 Size
Cable Exit Direction of 360°
Circular connector conforming to MIL-C-5015
PAT.P
50.1mm
54.5mm
70mm
3057-10
18
45.5mm
41mm
56.5mm
3057-10
48.2mm
60.7mm
78.7mm
3057-12
22
53.2mm
63.8mm
45.8mm
3057-12
Existing MS Connector Lower-profile Plug
18-10 Size
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.