Gas mixer0 pages
GM 50-01 / GM 100-01
GM 140-01 / GM 200-01 / GM 300-01
Gas Mixer
Features
Mixes gas and air to a very
homogenous mixture
DATA SHEET
Automatic metering of the
gas at any air flow according to Bernoulli’s law
Description
Cost effective and maintenance-free fuel system
component without moving parts
The gas mixer is an indispensable
component of the fuel system.
Whilst the throttle valve controls
the quantity of the mixture, the
mixing unit takes care for quality of
the mixture.
Very low pressure drop
due to the almost ideal
shaped Venturi insert
HEINZMANN mixers provide a
very homogeneous air and gas mixture and an optimal Air to Fuel Ratio (AFR)
over the entire speed and load range of the engine. HEINZMANN also can supply the remaining components of the fuel system such as main adjusting screw,
zero pressure regulator, throttle valve, speed and load control, AFR controls for
stoichiometric as well as for lean burn, adaptors, levers etc..
Gas Engine Output Range in kW *
Stoichiometric
Lean burn **
min.
max.
min.
max.
Size 50
35
125
25
85
Size 100
70
250
50
170
Size 140
140
500
100
340
Size 200
330
1200
230
840
Size 300
*
Adaptable matching throttle valve or hose connector
Suitable for naturally aspirated and turbo charged
engines
Application range
Type
Applicable for a wide range
of gasses (e.g. natural
gas, landfill gas, bio gas,
propane)
750
2250
500
1500
Power at draw-through carburetion. In blow-through application the output will be 50
% to 150 % higher, dependent on the boost pressure
** Power at an Air to Fuel Ratio of about 1,6
Technical data
Í Operating temperature: -20 to +150 °C
Í Max. boost pressure: 4 bar abs.
The carburettors can be
configured as draw-through
as well as blow-through
The carburettor models
are also available for dual
gas, EGR and low calorific
gasses
Supplied with balance
line connector in order to
compensate for air filter
restriction
For corrosive gases the
components are also
available in anti-corrosive
versions
The mixer insert can be
configured and removed
by the customer