Stainless Steel Membrane Separators0 pages
Stainless Steel Membrane Separators GMS105/105P
316L stainless steel construction
100 bar pressure rating
High flow PTFE membrane
Removal of liquids, aerosols
and particulate
GMS105
The Headline Membrane filter consists of a highly porous
PTFE membrane in a stainless steel/PTFE housing with two
bypass ports and inlet and outlet ports. The ports are designed
to allow for permanent pipework, thereby enabling easy
maintenance of the filter membrane. Within the housing 3
angled venturies cause the gas to be rotated beneath the
membrane, helping to keep the membrane clean and at the
same time allowing the finer gas molecules to pass through the
membrane for gas sampling and leaving the larger liquid
molecules to exit through the bypass ports. Further benefits of
the Headline Membrane Filter are that it is extremely inert and
is recommended for most applications, the only exception
being hydrofluoric acid. It is always recommended to use a
coalescing pre-filter and to use the membrane filter as the last
form of protection. The membrane is currently available in high
flow applications.
Principal Specifications
Housing Model
GMS105
GMS105P
Port Size - NPT
1/4”
1/4”
Maximum Pressure - Bar
100
Maximum Temperature - ºC
100
100
Head,Bowl & Internals
316L
PTFE (Teflon)
Gaskets
Viton
Flow Rate vs Pressure Drop
100
Viton
High Flow Membrane
Materials of Construction (1)
EPDM
EPDM
KALREZ
KALREZ
10
10
Principal Dimensions
A - mm
B - mm
63
63
C - mm
46.5
46.5
D - mm
22
22
Volume - cc
6
6
Weight - kg
0.8
0.8
Low Flow Membrane
Accessories
Gasket Set
GVGMS105-MT33-xx
GVGMS105-MT33-xx
GEGMS105-MT33-xx
GEGMS105-MT33-xx
KZGMS105-MT33-xx
Notes
KZGMS105-MT33-xx
GVGMS105-MT33-xx
Mounting Brackets
GMS105P
GVGMS105-MT33-xx
MBGMS105
MBGMS105
(1) PTFE has a maximum pressure of 100 PSIG
(2) Replace ‘xx’ with grade required, e.g. MT.33.M1 or MT.33.M2
1
"