SB2T0 pages
SB2T
SB2T
General features
Il Multi-Sensor Tester è uno strumento realizzato per la messa a
punto ed il controllo degli attuatori in genere. Esso infatti ingloba
in un unico dispositivo un cronometro, un tester per sensori
analogici e digitali, un rilevatore di picco, un conta cicli e un conta
impulsi. Tali funzionalità sono state inserite al fine di monitorare
il tempo ciclo e le vibrazioni dell’attuatore. Difatti collegando
alle morsettiere A e B due sensori di prossimità è possibile,
oltre che testarli, monitorare i tempi caratteristici (istantaneo,
medio, max, min, ecc…) e il numero di cicli del sistema. A mezzo
della funzione rilevazioni di picco possiamo inoltre far lavorare
in condizioni ottimali di moto l’attuatore monitorandone i livelli
di vibrazione istantanei. Ottimizzato il ciclo possiamo eseguire
test di durata con la funzione conta impulsi. Ogni valore è
visualizzato sullo schermo LCD retro-illuminato dotato di funzione
Zoom, Power Safe e Auto Spegnimento. Il tutto è fornito in una
valigetta comprensiva dello strumento, due sensori di prossimità
magnetici con adattatori, un sensore di vibrazioni analogico,
l’alimentatore per i test di vita e due batterie per le messe a
punto sul campo.
The Multi-Sensor Tester is an instrument designed to adjust and
check actuators. It is a single device incorporating a chronometer,
a tester for analogue and digital sensors, a peak detector, a cycle
counter and a pulse counter. These functions have been inserted
in order to monitor the cycle time and vibrations of the actuator.
In fact, by connecting two proximity sensors to the terminal blocks
A and B, it is possible not just to test them but also to monitor the
characteristic times (instantaneous, average, max, min, etc….), as
well as the cycle number of the system. In addition, using the peak
detection function we can also operate the actuator in optimum
motion condition, monitoring the instantaneous vibration levels.
Once the cycle has been optimized, endurance tests can be carried
out with the pulse counter function. Each value is displayed on the
LCD screen illuminated on the back and equipped with the Zoom,
Power Safe and Self-Off functions. Everything is supplied in a box
including the instrument, two magnetic proximity sensors with
adapters, an analogue sensor for vibrations, the power supply for
endurance tests and two batteries for field adjustments.
Configurazione
Layout
sensori d'urto
shock sensors
Generalità
P
•t olyethylene plastic BOX with Gimatic logo. Dimension
390X290X103.
A
•t nti-shock plastic filler.
S
•t B2T instrument (Sensors Tester, Chronometer, Cycle-counter,
Peak detector, Impulse-counter).
A
•t nalog Shock Sensor SG4A225X-G code.
D
•t igital PNP Shock Sensor SG4N225X-G code.
2
•t Magnetic proximity PNP sensors SS4N225-G code.
S
•t lot adapters.
2
•t X1,5 Vdc batteries.
1
•t 2 Vdc Power Supply.
11/2013
P
t
•t ratica scatola in Polietilene tampografata Gimatic mis.
390X290X103.
R
•t iempitivo bugnato antiurto in poliuretano espanso.
S
•t trumento SB2T (Tester sensori, Cronometro, Conta-Cicli,
Rilevatore di Picco, Conta-Impulsi).
S
•t ensore d’URTO analogico codice SG4A225X-G.
S
•t ensore d’URTO digitale PNP codice SG4N225X-G.
2
•t sensori di prossimità magnetici PNP codice SS4N225-G.
A
•t dattatori per cave.
2
•t Batterie Stilo 1.5 V.
A
•t limentatore 12 Vcc.
www.gimatic.com
Sensori d'urto / Shock sensors
53
"