Commander - Plastic Bodied Heavy Duty Telephones0 pages
GAI-Tronics Telephony
Commander
Plastic Bodied Heavy Duty Telephone
Standard and SMART Analogue and
VoIP-SIP options available
Vandal Resistant Handset and Cord
Robust and weather resistant: IP65
Full keypad, CB and 1, 3 and 6
button programmable autodialler
telephones
Dual purpose design for wall or
desk mounting, simple installation
Large tactile buttons, easy to see
and operate
Inductive Coupler fitted as standard
for hard of hearing
Standard or Customised units
Handset cord length options
CE Compliant
The Commander family of telephones are tough,
weather resistant units built to withstand abuse
and environmental extremes.
The Commander body is moulded in glass filled
polyester to prevent rust and corrosion. It is
simple to install with fixings concealed from view
giving increased security from vandalism.
Connectivity options are:
Standard Analogue
The standard analogue unit provides basic
telephone functions and can be connected to any
standard two-wire telephone line, including FXS
ports, analogue PABX lines and PSTN.
SMART Analogue
Self Monitoring And Reporting Telephone can be
integrated with GAI-Tronics' TMA monitoring and
maintenance software. SMART gives advanced
features including remote programming, fault
monitoring and call logging, all from a linepowered telephone capable of operating up to
7km from the exchange on a two-wire cable.
Voice over IP (SIP protocol)
For connection to a VoIP enabled network, GAITronics VoIP-SIP telephones offer direct
connection to LAN or WAN via RJ45 connector,
including Power-Over-Ethernet (PoE) as standard.
GAI-Tronics VoIP-SIP phones offer a wealth of
additional features including real-time reporting via
Syslog, and can be configured by web browser.
Keypad Options:
15 button Full Keypad
The 15 button keypad versions include:
S ‘Microphone mute’ or ‘Silence’, R ‘Recall’, LR
‘Last number redial’
1, 3 & 6 button Autodiallers
These models are programmable
via
an
internal
keypad.
A
microphone muting facility guards
against unauthorised calls made
with a remote MF tone pad. To
make a call, simply lift the handset
and press a single button. The preprogrammed number (up to 24
digits) will then dial automatically.
0 button CB
This can be used to initiate a PABX
'hotline' or lift handset and wait for
reply, where the PABX does the
call routing/dialling. Autodial on
handset lift also available.
As well as the standard Commander range, GAITronics can supply specials to order with
customised options.