VoIP Speaker Amplifier Assemblies0 pages
VoIP and WiFi Speaker Amplifier Assemblies
Model 10370-x01 and 10370-x02
GAI-TRONICS®
Features
•
•
•
•
•
•
•
•
•
•
•
•
Wired or WiFi VoIP
One-way broadcasting from IP network
Weatherproof enclosure
Direct 120/240 V ac input power or PoE
30-watt speaker amplifier (into an 8-ohm
speaker load) 10370-x01 series with
120/240 V ac input
24-watt, 70.7V or 100V audio output,
10370-x02 series with 120/240 V ac input
600-ohm audio output (all models)
Two programmable dry contact closure outputs
SIP compatible (RFC3261)
Real-time alarm reporting via email, Syslog,
or TMA software
Configurable via web page, serial link or download
Multicast capability, up to eight addresses
Model 10370-802 (Shown)
GAI-Tronics Model 10370-70x series VoIP Speaker Amplifier Assemblies enable broadcasting to personnel throughout a facility or area over an existing VoIP network via an external speaker(s) or connection to a central
amplifier speaker system. The Model 10370-80x series VoIP WiFi Speaker Amplifier Assemblies provide the same
capability as the Model 10370-70x series but allow connection to an existing wireless network. The amplifier
assemblies can easily be added to an existing network (10/100 baseT Ethernet) or wireless network (IEEE 802.11 b/g)
with minimal cost or effort.
The -701 and -801 series speaker amplifiers include an integrated speaker amplifier circuit that can supply up to 30
watts of output power to an 8-ohm speaker or combination of speakers equaling 8 ohms. The ability to utilize any
speaker or horn/driver combination permits selection of speakers that meet the coverage and environmental
requirements of a specific area. The -702 and -802 series amplifiers also include an integrated speaker amplifier
circuit but will instead provide a 70.7 V or 100 V, 25-watt output, eliminating the need for a separate central
amplifier for smaller system applications.
For additional design flexibility, each amplifier assembly also includes a 600-ohm, 0 dBm audio output. This output
can be connected to the audio input of a larger central amplifier or any broadcast equipment that requires a 600ohm audio input.
Each VoIP or VoIP WiFi Speaker Amplifier is capable of providing two dry contact, type A (normally open) outputs.
Each output is programmable for a variety of uses such as activation of a strobe in a high noise area or
initiating a door latch remotely.