READ – REMOTE ELECTRONIC AUTOMATION DEVICE0 pages
RE A D Remote Electronic Automation Device
The new READ (Remote Electronic Automation
Device) recently developed by Agisco includes
several types of units that are interchangeable
on the same serial line (bus) by employing a single communication protocol.
This suits any request for custom-made monitoring systems allowing further implementations if
needed.
Our new Remote Data Logger may connect any
of the system’s units by integrating both data
transmission technologies: serial RS-422 cable
connection and/or Agisco’s W-PAN (Wireless
Personal Area Network) radio link. Both options
may coexist to optimise the READ’s performances from any point of view: technological, economical, or ease of installation.
Each unit may read several types of signals such
as current, voltage, strain-gauges, thermistors,
PT100, digital input, etc.
By means of Windows or Linux PC, in their minimal configuration and consumption, any data
from every connected unit are acquired and
stored thanks to specifically developed software.
PCs may have a peripheral or remote location:
a modem will manage data reading and processing.
Data can also be managed by a web app specifically developed by Agisco called OVERSITE.
The speed of data acquisition may range, depending on the scanner in use, from one reading per day through to 100 readings or more per
second for each channel.
Agisco READs are all low power consumption.
When the system is operated from internal batteries or powered by solar panel the units can
be switched on only at pre-set intervals for improved operating time.
In its radio link configuration, each modulus with
Agisco W-PAN protocol is equipped with 4 input
channels for analogue signals, 4 channels for
digital input and 4 digital output channels for the
gauges power supply management.
The consumption of Agisco W-PAN units is so low
as to allow operating time of 1 to 5 years.
Modules are equipped with several serial interfaces for further extension of the monitoring system by simply adding one or more modules according to requirements.
In difficult environments because of unusual
electromagnetic fields, such as in urban areas,
the same W-PAN modulus may be used as
transceivers to broaden the system’s operational
distance.
READ - Data Acquisition Device
"