Thermogel TD0 pages

High Precision Temperature Controllers

PROFILE
• Working fluid

• Working temperature

SPECIFICATIONS
Water

195°
F

CONTROL PANEL
Interface is easy and simple to use.
The Display shows the temperature level
alphanumeric operating screen.

in big types and there is a wide

MICROPROCESSOR

up to max. :
• Models:

Single zone (M)
Double zone (D)

Monitoring of several parameters (operating pressure and temperature).
Temperature control with precision of ±0,6° The temperature variation is tuneF,
up following a proportional-integral logic.
Permanent digital read-out of the process water temperature and pressure.
Messages are shown in the selected language among the five available.

• Configuration:

Direct cooling,
heating with electric heaters

CONTROL AND ELECTRICAL CIRCUIT

Injection moulding, blow
moulding, extrusion.

Electrical panel EN 60204/1, IP 55 certified with shut-off switch .
Procedures are completely automatic for loading and unloading mould circuit.
Main alarms: no flow, high and low pressure in the circuit, short circuit or
disconnection of any probe, temperature warning for prolonged deviation from the
set-point. Acoustic alarm, prearranged optic alarm, which can be also remoteinstalled.

• Applications:

INTERFACEABILITY
Serial protocol for production machines of the most famous trademarks. Signal
retransmission and remote-set analogue signals.

HYDRAULIC CIRCUIT
High-performance stainless steel pumps, with special seal and tropicalized motor
(up to +140°F). Peripheral (P) and Centrifugal (C) models available.
Pressure adjustment by-pass device. Manual or automatic loading.
The automatic draining of the unit circuit is available for all P models.
The internal hydraulic circuit consists of 100% of stainless materials so to ensure
maximum life.
Safety valve.
Temperature control system consisting of a modulating adjusting valve: precision
and energy saving.

TDM-TDD
ADVANTAGES
High flow rate (∆T = 4°
F)
High Cooling capacity
High product precision
Minimum running costs

FRAME

Simple and safe use

Made of steel painted with epoxy powder, removable panels, installation on
rotating wheels.

Maximum repeatability and process efficiency

AVAILABLE RANGE

Heating power is 6, 12 and 24 kW by means of Incoloy® low surface load heating
elements.

Frigel North America Inc.
150 Prairie Lake Rd, Unit A
East Dundee, IL. 60118 USA
Tel +1 (847) 540-0160
Fax +1 (847) 540-0161

email: info@frigel.com - www.frigel.com
Frigel reserves the right to modify/change the technical characteristics of this machine.
This information is for presentation only and is not part of a legally binding contract