1250_Air Boost Static Control Bar0 pages
ANTI-STATIC
BARS
1250-AB AIRBOOST
STATIC ELIMINATOR
The 1250-AB Bar uses low
pressure compressed air to
extend the effective static
neutralisation range tt
up to 500 mm.
Typical applications for the
1250-AB are stopping
film sticking to rollers on
packaging machines, keeping
sensors clean and free of static,
neutralising mouldings on
conveyors - and many others.
>t The 1250-AB has all the advantages
of the 1250-S Bar with the
assistance of an airflow which
extends the neutralisation distance
up to 500 mm.
>t It is used for blowing ionised air t
into a restricted area, onto a product
which moves in position or onto a
substantially 3-dimensional product.
Specification
Construction:
The 1250-AB consists of a 1250 Bar mounted onto
an aluminium bracket with an airbox.
Air supply:
The air supply should be regulated down to about 1-2
Bar pressure to produce a gentle stream of ionised air.
The 1250-AB is not designed for high pressure blowoff applications- it should not be used to remove dust
from objects.
Air fittings:
Bars upto 1 m: one connector at the cable end for
12mm push-inpipe.
Bars over 1 m to 2.5 m: one connector at each end
for 12mm push-in pipes.
Cable:
Hi-Flex 30 kV screened cable with 70mm bend radius.
Standard length is 2m - longer lengths can be specified
at time of order (subject to maximum load on power
unit).
Safety:
5 mA maximum current from Power Unit. High
voltage resistance inside bars further limits current
below 50 µA.
Environment:
60º maximum temperature. 70% rH non-condensing
max.
Power Units:
Use with Fraser 5.5 kV and 6 kV Power Units.
See Datasheets.
120_AB_DS_iss4
Scotts Business Park, Bampton, Devon, GB, EX16 9DN
T + 44 (0) 1398 331114 F + 44 (0) 1398 331411
E sales@fraser-antistatic.co.uk W www.fraser-antistatic.com
© Fraser Anti-Static Techniques Ltd 2015
p1
"