Marine Duty Brakes0 pages
Maintenance Free Oil Shear
Clutches & Brakes For The Marine Industry
Force Control Clutches and Brakes are ideal choices for many
marine applications such as cranes, hoists, drawworks, winches, or containers, drilling rigs, and large bulk material handing
equipment such as trippers, dumpers, loaders or stacker reclaimers.
Force Control products are designed for heavy duty applications. The solid cast iron or cast aluminum, totally enclosed
housings, hold internal parts rigid, resist breaking or cracking,
and prevent dust, dirt or moisture from entering the friction
area.
Oil Shear Technology, the method of flowing torque transmitting transmission fluid through the friction stack, puts a film of
fluid between the friction discs and drive plates during high
speed slip that reduces mechanical wear, and removes the
heat that degrades the friction materials. This process also lubricates the inner components such
as anti friction bearings and splines.
The advantages of Clutches and Brakes with Oil
Shear Technology over the competition.
• Longer life—in typical applications it is not unusual to see 5 to 10 times the service life of
most competitive products.
• No Regular Maintenance*—There is no regular
maintenance replacing friction discs, pads, or
shoes, bearings, O-rings, or
coils.
• No Adjustment—Ever! - The
unique design and Oil Shear
Technology eliminate the
need for regular adjustment.
• Quiet Operation—the combination of Oil Shear Technology and the heavy sealed housings eliminate
the sharp noise of engagement and eliminate
any squeal of acceleration or deceleration.
• Higher Cycle Rates—Oil Shear Technology enables higher cycles rates by continuously removing heat in the friction stack.
• Less Down Time—The unique design, high
quality components and Oil Shear Technology
mean less chance of failure causing unexpected downtime.
*Annual fluid change recommended for maximum
performance and life.
MagnaShear™ Brake Motor
25 HP Motor with 200 Lb. Ft. Brake
Arctic Duty (-40), Marine Duty
Bio-Degradable Fluid
Positorq Drawworks Brake
Hydraulically Actuated Brake
150,000 Lb. Ft. Static Torque
70,000 Lb. Ft. Continuous Slip
800-829-3244
Posidyne Clutch
Hydraulically Actuated Clutch
78,000 Lb. In. Torque
Totally Enclosed, Marine Duty
Made in the USA—Shipped Worldwide
Force Control Industries, Inc. | 3660 Dixie Hwy. Fairfield, Ohio 45014 USA
Phone: 513-868-0900 800-829-3244 | Email: info@forcecontrol.com | www.forcecontrol.com