Belt Positioner Literature0 pages

BELT POSITIONER™

Immediate Tracking Results
The Belt Positioner™ is the simple, reliable solution for problem belts that consistently mistrack to
one side of the conveyor. The Belt Positioner works on the return side belt using simple angled rollers
mounted in a fixed position to quickly and continuously funnel the belt into the correct path. This is the
“quick fix” solution for belt tracking problems caused by conveyor misalignment mishaps, ground shifts,
or on temporary systems.
Comes assembled so it’s
ready for quick installation.
CoreTech™ Rollers are longer
lasting, corrosion resistant
and lighter weight

CoreTech, Exalon and Steel
Rollers are standard.
Ensures center loading by
installing before the tail pulley.

Features and Benefits
•t No belt edge damage. The idler rollers on the Belt Positioner make smooth contact with the return side
belt’s bottom cover and not on the belt’s edges.
•t Easy installation and setup. Simply preset the unit for the conveyor structure width, position the unit
on the belt and bolt or weld in place. Adjust the rollers to the belt and watch the results. It’s simple and
you can see the results immediately.
•t Economical. Durability and budget-conscious pricing make the Belt Positioner very versatile.
•t Long service life. The Belt Positioner’s innovative design does not rely on a pivoting mechanism
to move and steer a wandering belt. The rollers are sealed for life. Simply inspect the idler rollers
occasionally for wear.
•t High-performing CoreTech™ rollers. 50% lighter than steel, requiring less power to run the conveyor.

www.flexco.com
www.flexco.com

Immediately influence the
belt path up to 50 ft (15M)
in both directions.