4U Rackmount Chassis ACP-43600 pages

Industrial Computer Chassis
All product specifications are subject to change without notice
Last updated : 09-Nov-2009
Features
ACP-4362/4360
4U Rackmount Chassis with
6 Hot-Swap SATA Trays for RAID
Supports up to 6 SATA HDDs, which can be hot-swappable if a SATA
RAID card is used
Supports either an ATX motherboard or a PICMG backplane up to 15 slots
Supports one slim optical disk drive and one 3.5" FDD or internal HDD
LED indicators for LAN connectivity and alarm notification for redundant power supply, HDD activity, system fan and in-chassis temperature
Reusable, front-accessible filters for easy maintenance
RAID card compatibility
- ACP-4360: compatible with any RAID cards (no HDD failure/rebuild
indicators)
- ACP-4362: compatible with specific RAID cards (with HDD failure/rebuild
indicators)
ACP-4362's comprehensive RAID card solution features a web-based RAID management GUI for function setting and status monitoring
„X
„X
„X
„X
„X
„X
„X
Specifications
Model Name
ACP-4362
ACP-4360
Storage
HDD (supported)
6 (SATA)
6 (SATA)
RAID Card (supported)
Recommended RAID cards only
Any RAID cards
HDD Failure/Rebuild Indicators
Yes
No
Drive Bay
Slim Optical Drive
(Front-accessible)
1
1
3.5"
1 (FDD or internal HDD)
1 (FDD or internal HDD)
Cooling
Fan
1 (12 cm / 114 CFM) + 2 (8 cm / 47 CFM each)
Air Filter
Yes
Front I/O Interface
USB
2
Miscellaneous
LED Indicators
System: Power, HDD (for IDE drives only), fan, temperature, LAN1 and LAN2
SATA HDD trays: HDD power and activity
Rear Panel
Backplane version: One D-Sub 9-pin opening
Motherboard version: Five D-Sub 9-pin and one 68-pin SCSI openings
Environment
Operating
Non-Operating
Temperature
0 ~ 40° C (32 ~ 104° F)
-20 ~ 60° C (-4 ~ 140° F)
Humidity
10 ~ 85 % @ 40° C, non-condensing
10 ~ 95 %@ 40° C, non-condensing
Vibration (5 ~ 500 Hz)
1 Grms
2 G
Shock
10 G (with 11 ms duration, half sine wave)
30 G
Physical Characteristics
Dimensions (W x H x D)
482 x 177 x 502 mm (19" x 7" x 19.8")
Weight
19.0 kg (41.8 lb) / 19.5 kg (42.9 lb)
* Please choose ACP-4360 when customers don't use any RAID card or a third party RAID card is used. The SATA HDD hot swappability may be supported, but HDD failure and data rebuild indicators will not be available.
The ACP-4362 must go with RAID cards recommended by Advantech for all LEDs to function normally.
Easy-to-maintain system fan
Six hot-swappable SATA HDD trays
Slim optical disk drive
3.5" FDD or
internal HDD
Power switch
USB
System reset
Alarm reset
Power
Temp.
HDD
Fan
LAN1
LAN2
Rear view of ACP-4362MB